1995 Acura Integra Manual Transmission Fluid Type

The 1995 Acura Integra requires specific manual transmission fluid to ensure optimal performance and longevity. Using the correct fluid type is crucial for smooth shifting, proper lubrication, and protection against wear. Below are key sections covering fluid specifications, capacity, replacement procedures, and maintenance recommendations.

1. Recommended Fluid Specifications 2. Transmission Fluid Capacity 3. Fluid Replacement Procedure 4. Compatible Fluid Brands 5. Maintenance Schedule 6. Warning Signs of Fluid Issues 7. Tools Required 8. Safety Precautions 9. Troubleshooting

Recommended Fluid Specifications

The 1995 Acura Integra manual transmission requires specific fluid types for proper operation and protection.

Fluid TypeSpecification
Honda Genuine MTFRecommended OEM fluid
API Certified GL-475W-80 or 75W-85 weight
Hypoid Gear OilGL-4 rated only (do not use GL-5)
AlternativeGM Synchromesh or equivalent

IMPORTANT: Do not use automatic transmission fluid or GL-5 gear oil as it may damage synchronizers.

Transmission Fluid Capacity

Proper fluid level is essential for transmission operation and cooling.

NOTE: Capacity may vary slightly depending on transmission model (B18B1 engine).

Fluid Replacement Procedure

Follow these steps for proper fluid replacement.

  1. Park on level surface and engage parking brake
  2. Locate drain plug (bottom) and fill plug (side) of transmission
  3. Place drain pan under transmission
  4. Remove fill plug first to ensure it can be removed
  5. Remove drain plug and allow fluid to drain completely
  6. Clean drain plug and reinstall with new washer
  7. Fill transmission through fill hole until fluid reaches bottom of opening
  8. Reinstall fill plug with new washer
  9. Check for leaks and test drive

WARNING! Transmission fluid may be hot after driving. Allow to cool before servicing.

Compatible Fluid Brands

Several quality brands meet the specifications for 1995 Acura Integra manual transmission.

BrandProduct NameSpecification
HondaGenuine MTFOEM Recommended
GMSynchromeshExcellent alternative
Red LineMTF75W-80 Synthetic
AmsoilManual Transmission FluidGL-4 Compatible
PennzoilSynchromeshGM Specification

Maintenance Schedule

Regular maintenance ensures transmission longevity and performance.

Warning Signs of Fluid Issues

Recognize symptoms indicating transmission fluid problems.

SymptomPossible CauseAction Required
Hard shiftingOld or incorrect fluidDrain and refill with proper fluid
Grinding noiseLow fluid levelCheck and top up fluid
Transmission overheatingInsufficient fluidInspect for leaks and refill
Fluid leaksWorn seals or plugsReplace seals and washers
Burning smellOverheated fluidImmediate fluid change required

Tools Required

Proper tools ensure safe and efficient fluid service.

  1. 3/8" ratchet with extensions
  2. 24mm socket for drain and fill plugs
  3. Fluid transfer pump or hose
  4. Drain pan (2+ quart capacity)
  5. Torque wrench
  6. New crush washers for plugs
  7. Shop towels and cleaner
  8. Jack and jack stands (if needed)

SAFETY: Always use jack stands when working under vehicle.

Safety Precautions

Follow these safety guidelines during transmission service.

CAUTION! Used transmission fluid may contain harmful contaminants.

Troubleshooting

Common issues and solutions for 1995 Acura Integra manual transmission fluid system.

ProblemCauseSolution
Fluid leaking from fill plugWorn crush washerReplace crush washer and tighten to 33 ft-lbs
Difficulty removing fill plugCorrosion or overtighteningUse penetrating oil and proper socket
Fluid appears milkyWater contaminationComplete fluid flush required
Metal particles in fluidInternal transmission wearProfessional inspection needed
Shifting improves then worsensIncompatible fluid typeDrain and refill with correct Honda MTF

Professional Service: Contact certified Acura technician for complex issues.

1995 Acura Integra Manual Transmission Fluid Type © - All Rights Reserved 2025