1995 Acura Integra Repair Manual

The 1995 Acura Integra Repair Manual provides comprehensive technical information for maintaining and repairing the 1995 Acura Integra models. This manual covers engine systems, transmission, suspension, brakes, electrical systems, and routine maintenance procedures for the popular 1.8L engine variants including the B18B1 and B18C1 engines. Below are key sections for specifications, maintenance schedules, troubleshooting, and repair procedures.

1. Vehicle Specifications 2. Maintenance Schedule 3. Engine Systems 4. Transmission 5. Suspension & Steering 6. Brake Systems 7. Electrical Systems 8. Cooling System 9. Fuel System 10. Exhaust System 11. Troubleshooting Guide

Vehicle Specifications

Technical specifications for 1995 Acura Integra models including engine, transmission, and chassis details.

Specification	Description
Engine Type	1.8L DOHC 16-valve inline-4
Engine Codes	B18B1 (LS/GS), B18C1 (GS-R)
Horsepower	140 hp @ 6300 rpm (GS-R)
Torque	128 lb-ft @ 5200 rpm (GS-R)
Transmission	5-speed manual, 4-speed automatic
Fuel System	Multi-point fuel injection
Brake System	Front disc, rear drum (LS/GS), 4-wheel disc (GS-R)
Suspension	4-wheel independent double wishbone
Wheelbase	101.2 inches
Curb Weight	2600-2700 lbs

Maintenance Schedule

Recommended maintenance intervals for optimal vehicle performance and longevity.

Oil and filter change: Every 3,000 miles or 3 months
Air filter replacement: Every 15,000 miles
Spark plugs: Replace every 30,000 miles
Timing belt: Replace every 60,000-90,000 miles
Coolant flush: Every 2 years or 30,000 miles
Brake fluid: Replace every 2 years
Transmission fluid: Manual - 30,000 miles, Automatic - 60,000 miles

WARNING! Always use genuine Acura parts or equivalent quality replacements for optimal performance.

Engine Systems

Detailed procedures for engine maintenance, repair, and troubleshooting.

Valve Adjustment: Required every 15,000 miles - intake: 0.15-0.19mm, exhaust: 0.17-0.21mm
Timing Belt Replacement: Critical maintenance item - follow torque specifications precisely
Oil System: Capacity: 4.5 quarts with filter, use 5W-30 weight oil
Ignition System: NGK spark plugs recommended, gap: 0.039-0.043 inches
Compression: Standard: 199 psi, Minimum: 142 psi, Variation limit: 28 psi between cylinders

Transmission

Manual and automatic transmission service procedures and specifications.

Manual transmission fluid: Honda MTF recommended, capacity: 2.4 quarts
Automatic transmission fluid: Honda ATF-Z1, capacity: 2.7 quarts (drain and refill)
Clutch adjustment: Free play at pedal: 0.4-1.2 inches
Shift linkage: Lubricate every 30,000 miles

CAUTION! Use only specified transmission fluids to prevent damage.

Suspension & Steering

Front and rear suspension components, alignment specifications, and steering system.

Component	Specification
Front Camber	-0°30' ± 1°
Front Caster	1°30' ± 1°
Front Toe	0 ± 2mm
Rear Camber	-1°30' ± 30'
Rear Toe	2 ± 2mm
Power Steering Fluid	Honda Power Steering Fluid

Brake Systems

Brake system maintenance, pad replacement, and hydraulic system service.

Brake pad replacement: Front - 10mm minimum thickness, Rear - 1.0mm minimum
Rotor specifications: Front - minimum thickness 20.4mm, Rear - 8.0mm
Brake fluid: DOT 3 or DOT 4, replace every 2 years
Bleeding sequence: Right rear, left rear, right front, left front

WARNING! Always bleed brakes after any hydraulic system service.

Electrical Systems

Battery, charging system, starting system, and wiring diagrams.

Battery: 12V 45AH, CCA: 390 amps
Alternator: Output: 80 amps, regulated voltage: 13.9-15.1V
Starter: Rated power: 1.4 kW
Fuse box: Located under dashboard and in engine compartment
Bulb types: Headlight: 9006/9005, Brake light: 1157, Turn signal: 1156

Cooling System

Radiator, thermostat, water pump, and cooling system maintenance.

Coolant capacity: 5.8 quarts (including reservoir)
Thermostat: Opens at 180°F (82°C)
Radiator cap pressure: 13-17 psi
Coolant type: Honda All Season Antifreeze/Coolant 50/50 mix

CAUTION! Never open radiator cap when engine is hot.

Fuel System

Fuel pump, injectors, pressure regulator, and fuel filter service.

Component	Specification
Fuel Pressure	38-46 psi (key on, engine off)
Fuel Filter	Replace every 30,000 miles
Injector Resistance	10-13 ohms
Fuel Tank Capacity	13.2 gallons

Exhaust System

Manifold, catalytic converter, and exhaust pipe specifications.

Catalytic converter: Federal and California emissions versions available
Exhaust manifold: Cast iron, 4-2-1 design
O2 sensor: Replace every 100,000 miles
Torque specifications: Exhaust manifold nuts: 23 ft-lbs

Troubleshooting Guide

Common problems and solutions for the 1995 Acura Integra.

Symptom	Possible Cause	Corrective Action
Engine won't start	Battery, ignition, fuel system	Check battery voltage, spark, fuel pressure
Poor acceleration	Clogged filter, timing	Replace air filter, check ignition timing
Overheating	Coolant, thermostat	Check coolant level, test thermostat
Brake vibration	Warped rotors	Resurface or replace brake rotors
Transmission grinding	Low fluid, syncros	Check fluid level, inspect synchronizers

Technical Support: Acura Customer Service: 1-800-382-2238

Parts Information: Use genuine Acura parts for optimal performance and warranty