The 1995 Acura Legend Factory Service Manual provides comprehensive technical information for proper maintenance, repair, and servicing of the 1995 Acura Legend. This manual covers all major systems including engine, transmission, suspension, brakes, electrical, and body components. Below are key sections for specifications, maintenance procedures, troubleshooting, and technical data.
Complete technical specifications for the 1995 Acura Legend including engine, dimensions, capacities, and performance data.
| Specification | Details |
|---|---|
| Engine Type | 3.2L V6 SOHC 24-valve |
| Horsepower | 230 hp @ 6200 rpm |
| Torque | 206 lb-ft @ 5000 rpm |
| Transmission | 4-speed automatic / 5-speed manual |
| Fuel System | Multi-port fuel injection |
| Wheelbase | 114.6 inches |
| Curb Weight | 3545 lbs (sedan) |
| Fuel Capacity | 18.0 gallons |
| Brake System | 4-wheel disc with ABS |
| Suspension | 4-wheel independent double wishbone |
Recommended maintenance intervals and service procedures for optimal vehicle performance and longevity.
WARNING! Always use genuine Acura parts and recommended fluids for proper vehicle operation.
Detailed service procedures for the 3.2L V6 engine including timing belt replacement, valve adjustment, and component specifications.
Service procedures for automatic and manual transmissions, differential, and drive axle components.
Automatic Transmission: Fluid change intervals, shift solenoid replacement, valve body service.
Manual Transmission: Clutch replacement, shift linkage adjustment, fluid specifications.
Differential: Fluid capacity and change procedures. Drive Axles: CV joint service and boot replacement.
Front and rear suspension service including strut replacement, alignment specifications, and power steering system.
Tip: Always check wheel alignment after suspension component replacement.
Complete brake system service including ABS components, brake pad replacement, and hydraulic system procedures.
WARNING! Always test brake system operation before road use. Use DOT 3 or DOT 4 brake fluid only.
Comprehensive electrical system diagnosis and repair including charging, starting, and accessory systems.
Battery: Testing and replacement procedures. Alternator: Output testing and replacement. Starter: Bench testing and installation.
Lighting Systems: Headlight adjustment, bulb replacement specifications. Instrument Cluster: Gauge testing and repair.
Power Accessories: Window motors, door locks, and seat motor service.
Body panel replacement, interior trim service, and glass installation procedures.
Systematic diagnostic procedures for common driveability concerns and component failures.
| Symptom | Possible Cause | Corrective Action |
|---|---|---|
| Engine won't start | Battery, starter, fuel system | Check battery voltage, fuel pressure, spark delivery |
| Poor acceleration | Fuel filter, air filter, sensors | Replace filters, test TPS and MAP sensors |
| Transmission slipping | Fluid level, bands, solenoids | Check fluid level and condition, test shift solenoids |
| Brake pulsation | Warped rotors | Measure rotor runout, machine or replace rotors |
| Electrical issues | Ground connections, fuses | Check all ground points, test fuse continuity |
Factory-issued service bulletins addressing common concerns and updated repair procedures.
CAUTION! Always reference latest TSBs before performing complex repairs.
Complete electrical schematics for all vehicle systems including power distribution, ground locations, and connector views.
Color-coded wiring diagrams for: Engine control systems, Body electrical, Lighting circuits, ABS system, Climate control, Audio system.
Service Support: Contact Acura technical support for additional assistance with complex electrical diagnosis.