1997 Acura CL Service Manual

The 1997 Acura CL is a luxury coupe featuring a 2.2L VTEC engine, 4-speed automatic transmission, power windows/locks, cruise control, air conditioning, anti-lock brakes, dual airbags, and premium audio system. This service manual covers maintenance procedures, troubleshooting, repair instructions, and technical specifications for proper vehicle servicing. Below are key sections for maintenance schedules, engine systems, transmission, brakes, electrical, and diagnostics.

1. Maintenance Schedules 2. Engine Systems 3. Transmission Service 4. Brake Systems 5. Electrical Systems 6. Suspension & Steering 7. Heating & AC 8. Body & Interior 9. Technical Specifications 10. Troubleshooting Guide

Maintenance Schedules

Regular maintenance intervals for optimal performance and longevity.

IntervalService Required
7,500 milesOil and filter change, tire rotation
15,000 milesAir filter replacement, brake inspection
30,000 milesSpark plugs, coolant flush, transmission fluid
60,000 milesTiming belt, water pump, fuel filter
90,000 milesMajor service including all above items

WARNING! Always use genuine Acura parts for optimal performance and warranty compliance.

Engine Systems

The 2.2L F22B2 VTEC engine specifications and service procedures.

  1. Engine oil: Capacity 4.5 quarts with filter, use 5W-30
  2. Cooling system: Capacity 6.3 quarts, 50/50 coolant mix
  3. Spark plugs: NGK BKR6E-11, gap 0.039-0.043 inches
  4. Timing belt: Replace every 90,000 miles
  5. Compression: 170-185 psi, variation max 14 psi

CAUTION! Always disconnect battery before performing electrical work.

Transmission Service

4-speed automatic transmission maintenance and repair.

Tip: Check transmission fluid with engine running and transmission in Park.

Brake Systems

Front disc and rear drum brake service procedures.

ComponentSpecification
Front brake padsMinimum thickness 0.12 inches
Front rotorsMinimum thickness 0.87 inches
Rear brake shoesMinimum thickness 0.04 inches
Rear drumsMaximum diameter 7.96 inches
Brake fluidDOT 3, change every 2 years

WARNING! Always bleed brakes after any brake line disconnection.

Electrical Systems

Battery, charging, and electrical component specifications.

  1. Battery: 12V 60Ah, CCA 510A
  2. Alternator: 80A output
  3. Starter: 1.4 kW
  4. Fuses: Main 80A, under-hood and interior fuse boxes
  5. Bulbs: Headlight 9006/9005, brake 1157, turn 1156

CAUTION! Disconnect negative battery terminal first when working on electrical systems.

Suspension & Steering

Front MacPherson strut and rear double wishbone suspension service.

Heating & AC

Climate control system service and refrigerant specifications.

  1. Refrigerant: R-134a, capacity 1.76 lbs
  2. Compressor oil: PAG 46, 5.4 oz
  3. Blower motor: 12V DC, replace if noisy or inoperative
  4. Heater core: Flush if heating performance decreases
  5. AC pressure: High side 150-250 psi, Low side 25-40 psi

WARNING! AC system contains high pressure - discharge only with proper equipment.

Body & Interior

Body dimensions and interior component service.

MeasurementSpecification
Wheelbase106.9 inches
Overall length190.6 inches
Width70.1 inches
Height55.1 inches
Curb weight3,197 lbs

Tip: Use factory touch-up paint for minor body repairs.

Technical Specifications

Complete vehicle technical data and capacities.

Troubleshooting Guide

Common issues and diagnostic procedures.

SymptomPossible CauseCorrective Action
Engine won't startBattery, starter, fuel pumpCheck battery voltage, listen for fuel pump, test starter
Poor accelerationFuel filter, air filter, sensorsReplace filters, check TPS and MAP sensors
Transmission slippingLow fluid, worn clutch packsCheck fluid level and condition, test line pressure
Brake vibrationWarped rotors, worn componentsResurface or replace rotors, check calipers
Electrical issuesAlternator, battery, groundsTest charging system, clean battery terminals

Service: Contact Acura dealer or certified technician for complex repairs.

1997 Acura CL Service Manual © - All Rights Reserved 2025