The 2000 Acura Integra Service Manual provides comprehensive technical information for maintaining and repairing the 2000 Acura Integra. This manual covers all major systems including engine, transmission, suspension, brakes, electrical, and body components. It includes detailed specifications, troubleshooting procedures, maintenance schedules, and repair instructions for professional technicians and DIY enthusiasts. Below are key sections for specifications, maintenance, repair procedures, and troubleshooting.
Key technical specifications for the 2000 Acura Integra including engine, dimensions, and performance data.
| Specification | Description |
|---|---|
| Engine Type | 1.8L DOHC 16-valve inline-4 |
| Horsepower | 140 hp @ 6300 rpm |
| Torque | 128 lb-ft @ 5200 rpm |
| Transmission | 5-speed manual / 4-speed automatic |
| Fuel System | Multi-point fuel injection |
| Fuel Capacity | 13.2 gallons |
| Curb Weight | 2,579 lbs |
| Wheelbase | 101.2 inches |
| Length | 172.4 inches |
| Brakes | Front disc / rear drum with ABS |
Recommended maintenance intervals for optimal vehicle performance and longevity.
WARNING! Always use genuine Acura parts for optimal performance and warranty compliance.
Detailed service procedures for the B18B1 engine and related components.
CAUTION! Always disconnect battery before performing electrical work. Use proper lifting equipment.
Front and rear suspension service including MacPherson strut front and double wishbone rear suspension.
Front Suspension: Strut replacement, control arm service, ball joint inspection
Rear Suspension: Upper/lower control arms, trailing arm service
Steering: Rack and pinion service, power steering pump, alignment specifications
Disc brake front, drum brake rear with optional ABS system service procedures.
Tip: Always replace brake components in axle sets for balanced braking.
Complete electrical system wiring diagrams, component locations, and diagnostic procedures.
WARNING! Always disconnect battery before electrical repairs. Use proper circuit protection.
Body panel replacement, interior trim service, and accessory installation procedures.
| Symptom | Possible Cause | Corrective Action |
|---|---|---|
| Engine won't start | Battery, starter, fuel system | Check battery voltage, fuel pressure, spark |
| Poor acceleration | Clogged filter, ignition issues | Replace air filter, check spark plugs |
| Brake vibration | Warped rotors | Machine or replace brake rotors |
| Electrical issues | Battery, alternator, grounds | Test charging system, check grounds |
| Transmission slipping | Low fluid, worn components | Check fluid level, inspect clutch/bands |
Reset: ECU reset procedure for clearing diagnostic codes
Service: Contact Acura dealer for technical support and genuine parts