2000 Acura RL Repair Manual

The 2000 Acura RL is a luxury sedan featuring a 3.5L V6 engine, 5-speed automatic transmission, front-wheel drive, advanced suspension system, comprehensive safety features, and sophisticated electronic systems. This repair manual provides detailed instructions for maintenance, troubleshooting, and repair procedures for all major components including engine, transmission, brakes, suspension, electrical systems, and more. Below are key sections for technical specifications, maintenance schedules, repair procedures, and troubleshooting guides.

1. Vehicle Specifications 2. Maintenance Schedule 3. Engine System 4. Transmission 5. Brake System 6. Suspension & Steering 7. Electrical System 8. Heating & AC 9. Body & Interior 10. Troubleshooting 11. Technical Service Bulletins

Vehicle Specifications

Key technical specifications for the 2000 Acura RL including engine, dimensions, capacities, and performance data.

SpecificationDescription
Engine Type3.5L SOHC V6
Horsepower225 hp @ 5200 rpm
Torque231 lb-ft @ 2800 rpm
Transmission5-speed automatic
DrivetrainFront-wheel drive
Fuel Capacity18.5 gallons
Curb Weight3,781 lbs
Wheelbase116.4 inches
Overall Length196.6 inches
Brake System4-wheel disc with ABS

Maintenance Schedule

Recommended maintenance intervals and service procedures for optimal vehicle performance and longevity.

  1. Oil and filter change: Every 7,500 miles or 12 months
  2. Tire rotation: Every 7,500 miles
  3. Air filter replacement: Every 30,000 miles
  4. Spark plug replacement: Every 105,000 miles
  5. Timing belt replacement: Every 105,000 miles
  6. Brake fluid replacement: Every 3 years
  7. Coolant replacement: Every 10 years or 120,000 miles

WARNING! Always use genuine Acura parts and fluids for optimal performance and warranty compliance.

Engine System

Detailed repair procedures for the 3.5L V6 engine including component replacement and troubleshooting.

  1. Engine removal and installation procedures
  2. Cylinder head removal and valve adjustment
  3. Timing belt and balance belt replacement
  4. Oil pump and water pump service
  5. Fuel system maintenance and injector service
  6. Ignition system diagnosis and spark plug replacement
  7. Emission control system troubleshooting

CAUTION! Always disconnect battery before working on electrical components. Allow engine to cool before servicing.

Transmission

Brake System

Complete brake system service including ABS diagnosis and repair procedures.

Front Brakes: 11.8-inch ventilated discs, dual-piston calipers. Rear Brakes: 11.1-inch solid discs, single-piston calipers.

Brake Pad Replacement: Front and rear pad replacement procedures. Rotor Service: Resurfacing specifications and replacement. ABS System: Wheel speed sensor testing, ABS modulator service. Brake Bleeding: Proper bleeding sequence and fluid specifications.

Suspension & Steering

Front and rear suspension components and power steering system service.

  1. Front strut replacement and alignment procedures
  2. Rear suspension component inspection and replacement
  3. Power steering pump service and fluid specifications
  4. Steering gear inspection and adjustment
  5. Wheel bearing replacement procedures

Tip: Always perform wheel alignment after suspension component replacement.

Electrical System

Comprehensive electrical system diagnosis and repair procedures.

  1. Battery testing and replacement procedures
  2. Alternator output testing and replacement
  3. Starter motor diagnosis and service
  4. Fuse box locations and circuit descriptions
  5. Lighting system troubleshooting and bulb replacement
  6. Power window and door lock system repair
  7. Instrument cluster diagnosis and service

WARNING! Always disconnect battery before electrical work. Use proper circuit protection.

Heating & AC

Climate control system service including AC charging and heater core replacement.

Body & Interior

Body panel replacement, interior component service, and trim repair procedures.

CAUTION! Use proper safety equipment when working with airbag systems and electrical components.

Troubleshooting

Common problems and diagnostic procedures for the 2000 Acura RL.

SymptomPossible CauseCorrective Action
Engine misfireIgnition coils, spark plugsCheck ignition coils and plugs; replace as needed
Transmission slippingLow fluid, worn clutchesCheck fluid level and condition; perform pressure test
ABS light onWheel sensors, modulatorScan for codes; test wheel speed sensors
Electrical issuesBattery, alternator, groundsTest charging system; check ground connections
Brake vibrationWarped rotors, worn padsInspect rotors and pads; resurface or replace

Reset Procedures: Maintenance reminder reset, ECM reset procedures.

Service Support: Contact Acura dealer for technical assistance and genuine parts.

2000 Acura RL Repair Manual © - All Rights Reserved 2025