2000 Acura RL Service Manual

The 2000 Acura RL Service Manual provides comprehensive technical information for the maintenance, repair, and servicing of the 2000 Acura RL luxury sedan. This manual covers the 3.5L V6 engine, 4-speed automatic transmission, suspension systems, electrical systems, brake systems, climate control, and all major vehicle components. Below are key sections for maintenance procedures, specifications, troubleshooting, and repair instructions.

1. Vehicle Specifications 2. Maintenance Schedules 3. Engine Systems 4. Transmission 5. Brake Systems 6. Suspension & Steering 7. Electrical Systems 8. Climate Control 9. Body & Interior 10. Troubleshooting Guide 11. Technical Service Bulletins

Vehicle Specifications

Complete technical specifications for the 2000 Acura RL including engine, transmission, dimensions, and capacities.

Specification	Details
Engine Type	3.5L SOHC V6
Horsepower	225 hp @ 5200 rpm
Torque	231 lb-ft @ 2800 rpm
Transmission	4-speed automatic with SportShift
Fuel System	Programmed Fuel Injection (PGM-FI)
Fuel Capacity	18.5 gallons
Curb Weight	3,781 lbs
Overall Length	196.1 inches
Wheelbase	114.6 inches
Brake System	4-wheel disc with ABS

Maintenance Schedules

Recommended maintenance intervals and service procedures for optimal vehicle performance.

Oil and filter change: Every 7,500 miles or 12 months
Air filter replacement: Every 30,000 miles
Spark plug replacement: Every 105,000 miles
Timing belt replacement: Every 105,000 miles
Brake fluid replacement: Every 3 years
Coolant replacement: Every 5 years or 60,000 miles

WARNING! Always use genuine Acura parts and fluids for optimal performance and warranty compliance.

Engine Systems

Detailed service procedures for the 3.5L V6 engine and related systems.

Engine Removal: Complete step-by-step procedure with torque specifications
Cylinder Head Service: Valve adjustment, head gasket replacement
Fuel System: Fuel pump, injectors, pressure regulator service
Ignition System: Spark plugs, ignition coils, distributor service
Cooling System: Radiator, thermostat, water pump replacement
Exhaust System: Manifold, catalytic converter, muffler service

Transmission

Service procedures for the 4-speed automatic transmission with SportShift.

Transmission fluid change: Every 30,000 miles
Fluid type: Honda/Acura ATF-Z1
Shift solenoid testing and replacement procedures
Transmission control module diagnostics
SportShift mechanism service

CAUTION! Use only specified transmission fluid to prevent damage.

Brake Systems

Complete brake system service including ABS and traction control.

Component	Service Procedure
Brake Pads	Front and rear pad replacement with bedding procedure
Rotors	Specifications: Minimum thickness 0.882 inches front, 0.354 inches rear
ABS System	Diagnostic trouble code reading and component testing
Brake Fluid	DOT 3 or DOT 4 fluid specification
Master Cylinder	Bench bleeding and installation procedure

Suspension & Steering

Front double wishbone and rear multi-link suspension service procedures.

Strut and shock absorber replacement
Control arm and ball joint service
Wheel alignment specifications: Camber, caster, toe
Power steering system service and fluid specification
Stabilizer bar and bushings replacement

Tip: Always perform wheel alignment after suspension component replacement.

Electrical Systems

Comprehensive electrical system diagnostics and repair procedures.

Battery: Maintenance, testing, replacement procedure
Charging System: Alternator testing and replacement
Starting System: Starter motor diagnosis and service
Lighting Systems: Headlight, taillight, interior lighting service
Power Accessories: Windows, locks, seats, mirror systems
Instrument Cluster: Gauge cluster service and bulb replacement

Climate Control

Automatic climate control system service and repair.

A/C system evacuation and recharge procedure
Compressor replacement and oil capacity specifications
Heater core replacement procedure
Blower motor and resistor service
Climate control module diagnostics

WARNING! A/C system service requires certified technician and proper equipment.

Body & Interior

Body panel, trim, and interior component service procedures.

Door Panel Removal: Step-by-step procedure for all doors
Seat Service: Power seat motor and track replacement
Dashboard Components: Radio, climate control, instrument panel service
Exterior Trim: Moldings, emblems, and body side molding replacement
Glass Service: Windshield and window replacement procedures

Troubleshooting Guide

Common problems and diagnostic procedures for the 2000 Acura RL.

Symptom	Possible Cause	Corrective Action
Engine misfire	Faulty spark plugs, ignition coils	Check spark plugs and ignition coils; replace as needed
Transmission slipping	Low fluid, worn clutches	Check fluid level and condition; perform pressure test
ABS light on	Faulty wheel sensor, ABS module	Scan for trouble codes; test wheel sensors
Power steering noise	Low fluid, pump failure	Check fluid level; inspect pump for leaks and noise
A/C not cooling	Low refrigerant, compressor failure	Check refrigerant pressure; test compressor operation

Technical Service Bulletins

Manufacturer-issued service bulletins and updates for known issues.

TSB 01-001: Updated transmission control module calibration
TSB 02-015: Revised procedure for power steering pump replacement
TSB 03-022: Improved brake pad compound for reduced noise
TSB 04-008: Climate control module software update
TSB 05-012: Enhanced engine mount design for vibration reduction

Service Support: Contact Acura customer service at 1-800-382-2238 or visit acura.com