2001 Acura CL Repair Manual PDF

The 2001 Acura CL Repair Manual provides comprehensive technical information for maintaining and repairing the 2001 Acura CL model. This manual covers engine systems, transmission, suspension, brakes, electrical systems, heating and air conditioning, body components, and routine maintenance procedures. Below are key sections for specifications, maintenance schedules, troubleshooting, repair procedures, and technical data.

1. Vehicle Specifications 2. Maintenance Schedule 3. Engine Systems 4. Transmission 5. Brake System 6. Suspension & Steering 7. Electrical System 8. Heating & AC 9. Body & Interior 10. Troubleshooting 11. Technical Data

Vehicle Specifications

Key technical specifications for the 2001 Acura CL model.

Specification	Description
Engine Type	3.2L V6 SOHC 24-valve
Horsepower	225 hp @ 5500 rpm
Torque	217 lb-ft @ 3500 rpm
Transmission	5-speed automatic with SportShift
Fuel System	Programmed Fuel Injection (PGM-FI)
Brake System	4-wheel disc brakes with ABS
Suspension	4-wheel independent double-wishbone
Fuel Capacity	17.2 gallons
Curb Weight	3,505 lbs
Overall Length	192.0 inches

Maintenance Schedule

Recommended maintenance intervals for optimal vehicle performance.

Oil and filter change: Every 7,500 miles or 12 months
Air filter replacement: Every 30,000 miles
Spark plug replacement: Every 105,000 miles
Timing belt replacement: Every 105,000 miles
Brake fluid replacement: Every 3 years
Coolant replacement: Every 10 years or 120,000 miles
Tire rotation: Every 7,500 miles

WARNING! Always use genuine Acura parts for replacements to ensure proper fit and performance.

Engine Systems

Detailed repair procedures for engine components and systems.

Engine removal and installation procedures
Cylinder head service and valve adjustment
Timing belt and balance belt replacement
Fuel system service and injector cleaning
Ignition system diagnosis and repair
Cooling system maintenance and repair
Exhaust system inspection and replacement

CAUTION! Always disconnect battery before working on electrical components.

Transmission

Transmission Type: 5-speed automatic with SportShift
Fluid Capacity: 3.1 quarts (drain and refill)
Fluid Type: Honda ATF-Z1 or equivalent
Service Intervals: Fluid change every 30,000 miles
Shift Solenoid Testing: Resistance specifications provided
Transmission Control Module: Location and diagnostic procedures
Shift Cable Adjustment: Step-by-step adjustment procedure

Brake System

Complete brake system service and repair information.

Front Brakes: Disc brakes with single-piston floating calipers, 11.8-inch rotors. Rear Brakes: Disc brakes with single-piston floating calipers, 11.1-inch rotors.

Brake Pad Replacement: Front and rear pad replacement procedures, bedding-in process. Rotor Service: Minimum thickness specifications, resurfacing procedures. ABS System: Wheel speed sensor testing, hydraulic control unit service, diagnostic trouble codes. Brake Bleeding: Proper bleeding sequence and fluid requirements.

Suspension & Steering

Front and rear suspension components and steering system repair.

Front strut removal and installation
Control arm and ball joint replacement
Stabilizer bar and link replacement
Wheel bearing service and replacement
Power steering system service
Alignment specifications and procedures
Tire pressure monitoring system reset

Tip: Always use proper torque specifications when tightening suspension components.

Electrical System

Wiring diagrams, component locations, and electrical troubleshooting.

Battery testing and replacement procedures
Alternator output testing and replacement
Starter motor diagnosis and service
Fuse and relay box locations and diagrams
Lighting system repair and bulb replacement
Power window and door lock repair
Instrument cluster diagnosis and repair
Audio system wiring and component replacement

WARNING! Disconnect battery negative terminal before performing electrical work.

Heating & AC

Climate control system service and repair procedures.

AC System: Refrigerant capacity and type, compressor replacement, condenser service. Heater System: Heater core replacement, blower motor service, temperature control diagnosis. HVAC Controls: Control head diagnosis, mode door actuator replacement. Refrigerant Handling: Proper evacuation and recharge procedures, leak detection methods.

Body & Interior

Body panel replacement and interior component repair.

Body Dimensions: Factory specifications for repair reference
Panel Alignment: Adjustment procedures for doors, hood, and trunk
Glass Replacement: Windshield and window replacement procedures
Seat Service: Power seat motor replacement and track repair
Dashboard: Component removal and installation procedures
Carpet and Trim: Removal and replacement instructions

Troubleshooting

Symptom	Possible Cause	Corrective Action
Engine won't start	Battery, starter, fuel system	Check battery voltage, test starter, verify fuel pressure.
Poor acceleration	Fuel filter, air filter, sensors	Replace fuel and air filters, test MAF and O2 sensors.
Brake vibration	Warped rotors, worn pads	Resurface or replace rotors, install new brake pads.
Electrical issues	Bad grounds, blown fuses	Check ground connections, test fuses and relays.
Transmission slipping	Low fluid, worn clutches	Check fluid level and condition, perform pressure test.

Diagnostic Codes: OBD-II code retrieval and interpretation procedures.

Technical Data

Complete technical specifications and service data.

Torque Specifications: All critical fastener torque values
Fluid Capacities: Engine oil, coolant, transmission, brake fluid
Bulb Specifications: All interior and exterior lighting bulbs
Fuse Ratings: Complete fuse panel information
Wiring Colors: Standard wire color codes for electrical diagnosis
Special Tools: Required special service tools and part numbers
Lubrication Points: Grease fittings and lubrication intervals

Service Support: Contact Acura customer service for technical assistance.