2001 Acura CL Type S Service Manual PDF

The 2001 Acura CL Type S Service Manual provides comprehensive technical information for maintenance, repair, and service procedures for the Acura CL Type S model. This manual covers engine specifications, transmission systems, electrical systems, suspension, brakes, steering, heating and air conditioning, body components, and troubleshooting guides. Below are key sections for technical specifications, maintenance schedules, repair procedures, and diagnostic information.

1. Vehicle Specifications 2. Maintenance Schedules 3. Engine Systems 4. Transmission & Drivetrain 5. Electrical Systems 6. Suspension & Steering 7. Brake Systems 8. Heating & AC 9. Body & Interior 10. Troubleshooting 11. Wiring Diagrams

Vehicle Specifications

Key technical specifications for the 2001 Acura CL Type S including engine, dimensions, and performance data.

Specification	Description
Engine Type	3.2L V6 VTEC
Horsepower	260 hp @ 6100 rpm
Torque	232 lb-ft @ 3500-5500 rpm
Transmission	6-speed manual / 5-speed automatic
Drivetrain	Front-wheel drive
Fuel System	Programmed Fuel Injection (PGM-FI)
Fuel Capacity	17.1 gallons
Curb Weight	3482 lbs
Wheelbase	106.9 inches
Brakes	4-wheel disc with ABS

Maintenance Schedules

Recommended maintenance intervals and service procedures.

Oil and filter change: Every 7,500 miles or 12 months
Tire rotation: Every 7,500 miles
Air filter replacement: Every 30,000 miles
Spark plug replacement: Every 105,000 miles
Timing belt replacement: Every 105,000 miles
Brake fluid replacement: Every 3 years
Coolant replacement: Every 10 years or 120,000 miles

WARNING! Always use genuine Acura parts for optimal performance and warranty compliance.

Engine Systems

Detailed service procedures for the 3.2L V6 VTEC engine.

Engine removal and installation procedures
Cylinder head service and valve adjustment
Timing belt and balance shaft belt replacement
Fuel system service and injector cleaning
Ignition system maintenance
Cooling system service and thermostat replacement
Exhaust system inspection and repair

CAUTION! Always disconnect battery before performing electrical work.

Transmission & Drivetrain

Manual Transmission: 6-speed gearbox service and clutch replacement
Automatic Transmission: 5-speed automatic fluid service and adjustment
Differential: Front differential service and fluid replacement
Drive Axles: CV joint service and boot replacement
Transfer Case: Not applicable (FWD only)
Fluid Specifications: Honda ATF-Z1 for automatic, MTF for manual
Shift Linkage: Adjustment procedures for precise shifting

Electrical Systems

Complete electrical system diagnosis and repair procedures.

Battery: Maintenance-free, 12V 60Ah. Alternator: 110A output. Starter: 1.4kW reduction type.

Systems covered: Starting system, charging system, lighting, instruments, power accessories, audio system, climate control, security system, and body control modules.

Suspension & Steering

Front and rear suspension service with power steering systems.

Front strut replacement and alignment procedures
Rear multi-link suspension service
Stabilizer bar and bushing replacement
Power steering pump and rack service
Wheel alignment specifications and procedures
Ball joint and tie rod end replacement

Tip: Always perform wheel alignment after suspension repairs.

Brake Systems

Complete brake system service including ABS diagnostics.

Front and rear brake pad replacement
Rotor machining and replacement specifications
Brake fluid bleeding procedures
ABS module diagnosis and repair
Parking brake adjustment
Master cylinder and booster service
Brake line and hose inspection

WARNING! Always test brake system thoroughly after service.

Heating & AC

Climate control system service and refrigerant handling.

Body & Interior

Body panel repair and interior component service.

CAUTION! Use proper safety equipment when working with airbag systems.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Engine won't start	Battery, starter, fuel system	Check battery voltage, fuel pressure, spark
Poor acceleration	Fuel filter, air filter, sensors	Replace filters, check MAF sensor
Transmission slipping	Low fluid, worn clutch	Check fluid level, inspect clutch
Brake vibration	Warped rotors	Machine or replace rotors
Electrical issues	Battery, alternator, grounds	Test charging system, check grounds

Reset: ECU reset procedure: Disconnect battery for 10 minutes.

Wiring Diagrams

Complete electrical wiring diagrams for all systems including color codes and connector locations.

Service: For technical support contact Acura customer service or visit authorized dealership.