2002 Acura RSX Service Manual PDF

The 2002 Acura RSX Service Manual provides comprehensive technical information for maintaining and repairing the Acura RSX. This manual covers the base and Type-S models with 2.0L i-VTEC engines, 5-speed manual and automatic transmissions, chassis systems, electrical systems, body components, and diagnostic procedures. Below are key sections for specifications, maintenance, troubleshooting, and repair procedures.

1. Vehicle Specifications 2. Maintenance Schedules 3. Engine Systems 4. Transmission 5. Chassis & Suspension 6. Brake Systems 7. Electrical Systems 8. Body & Interior 9. Diagnostic Procedures 10. Safety Precautions 11. Troubleshooting

Vehicle Specifications

Technical specifications for 2002 Acura RSX models including engine, transmission, and chassis details.

SpecificationDescription
Engine Type2.0L i-VTEC 4-cylinder
Horsepower160 hp (base), 200 hp (Type-S)
Transmission5-speed manual/automatic
Fuel SystemProgrammed Fuel Injection (PGM-FI)
Brake System4-wheel disc with ABS
Suspension4-wheel independent
Fuel Capacity13.2 gallons
Curb Weight2,744 lbs (base)
Wheelbase101.2 inches
Tire SizeP205/55R16

Maintenance Schedules

Recommended maintenance intervals and service procedures.

  1. Oil Change: Every 7,500 miles or 12 months
  2. Air Filter: Replace every 30,000 miles
  3. Spark Plugs: Replace every 105,000 miles
  4. Timing Chain: Inspect every 60,000 miles
  5. Brake Fluid: Replace every 3 years
  6. Coolant: Replace every 10 years/120,000 miles

WARNING! Always use genuine Acura parts for optimal performance and warranty compliance.

Engine Systems

Detailed service procedures for engine components and systems.

  1. Engine Removal & Installation: Complete step-by-step procedure
  2. Cylinder Head: Removal, inspection, and installation
  3. Valve Adjustment: Specifications and procedure
  4. Timing Chain: Replacement and tensioning
  5. Fuel System: Injector service and fuel pump replacement
  6. Cooling System: Radiator, thermostat, and water pump service

CAUTION! Always disconnect battery before performing engine service.

Transmission

Chassis & Suspension

Front and rear suspension service procedures including alignment specifications.

Front Suspension: Strut replacement, control arm service, ball joint inspection

Rear Suspension: Multi-link system service, wheel bearing replacement

Alignment: Camber, caster, and toe specifications. Front: Camber -0°20' ± 45', Caster +2°30' ± 45', Toe 0 ± 2mm. Rear: Camber -1°30' ± 45', Toe +2 ± 2mm.

Brake Systems

Complete brake system service including ABS diagnostics.

  1. Brake Pad Replacement: Front and rear procedures
  2. Rotor Service: Measurement specifications and replacement
  3. Brake Fluid Bleeding: Manual and pressure bleeding methods
  4. ABS System: Diagnostic trouble code reading and component testing
  5. Parking Brake: Adjustment and cable replacement

Tip: Always replace brake components in axle sets for even braking.

Electrical Systems

Wiring diagrams, component locations, and electrical troubleshooting.

  1. Battery: Testing and replacement procedures
  2. Charging System: Alternator testing and replacement
  3. Starting System: Starter motor service
  4. Lighting Systems: Headlight, taillight, and signal light replacement
  5. ECU/PCM: Location and diagnostic procedures
  6. Fuse Box: Locations and circuit descriptions

WARNING! Disconnect battery before performing electrical work to prevent shorts.

Body & Interior

Body panel replacement, interior component service, and trim procedures.

  1. Door Panel: Removal and installation
  2. Dashboard: Component access and service
  3. Seats: Removal and track service
  4. Windows: Regulator and motor replacement
  5. Exterior Trim: Bumper and moldings service

Diagnostic Procedures

Using diagnostic tools and interpreting trouble codes.

OBD-II Connector: Location under driver's dashboard. Code Reading: Using Honda/Acura diagnostic tool or generic OBD-II scanner. Common Codes: P0135 (O2 Sensor), P0300 (Random Misfire), P0420 (Catalyst Efficiency).

Safety Precautions

Essential safety procedures for all service operations.

CAUTION! Always use jack stands when working under vehicle. Wear safety glasses during repairs. Handle fluids properly and dispose according to regulations.

Troubleshooting

SymptomPossible CauseCorrective Action
Engine won't startBattery, starter, fuel pumpCheck battery voltage, test starter, listen for fuel pump prime
Poor accelerationClogged filter, sensor issuesReplace air filter, check MAF sensor, fuel pressure
Brake vibrationWarped rotorsMeasure rotor thickness, replace if below spec
Electrical issuesGround connectionsCheck and clean ground points, test battery
Transmission issuesFluid level, sensorsCheck fluid level and condition, scan for codes

Reset Procedures: ECU reset by disconnecting battery for 10 minutes.

Technical Support: Acura dealership service department or certified technician.

2002 Acura RSX Service Manual PDF © - All Rights Reserved 2025