The 2005 Acura MDX Service Manual provides comprehensive technical information for maintenance, repair, and service procedures for the 2005 Acura MDX luxury SUV. This manual covers engine systems, transmission, suspension, brakes, electrical systems, heating and air conditioning, body components, and general maintenance schedules. Below are key sections for specifications, maintenance procedures, troubleshooting, and service guidelines.
Technical specifications for the 2005 Acura MDX including engine, dimensions, capacities, and performance data.
| Specification | Description |
|---|---|
| Engine Type | 3.5L V6 VTEC |
| Horsepower | 265 hp @ 5800 rpm |
| Torque | 250 lb-ft @ 3500-5000 rpm |
| Transmission | 5-speed automatic with SportShift |
| Drivetrain | Variable Torque Management 4WD |
| Fuel Capacity | 19.2 gallons |
| Curb Weight | 4451 lbs |
| Towing Capacity | 4500 lbs |
| Wheelbase | 106.3 inches |
| Overall Length | 188.5 inches |
Recommended maintenance intervals and service procedures for optimal vehicle performance.
WARNING! Always use genuine Acura parts and fluids for optimal performance and warranty compliance.
Detailed procedures for engine maintenance, repair, and component replacement.
CAUTION! Always disconnect battery before performing electrical work. Allow engine to cool before servicing.
Comprehensive brake system service including disc brakes, pads, rotors, and ABS components.
Front Brakes: Ventilated discs, 12.6 inch diameter. Rear Brakes: Solid discs, 12.3 inch diameter.
Brake pad replacement procedure, rotor inspection and machining specifications, brake fluid bleeding procedure, ABS component testing and replacement, parking brake adjustment.
Front and rear suspension components, steering system maintenance, and alignment specifications.
Tip: Always use torque wrench for suspension component fasteners to specified values.
Battery, charging system, starting system, lighting, and accessory electrical systems.
WARNING! Disconnect battery negative terminal before performing electrical repairs to prevent short circuits.
Climate control system service including compressor, condenser, evaporator, and controls.
| Component | Service Procedure |
|---|---|
| A/C Compressor | Replacement and oil charge procedure |
| Condenser | Removal and installation |
| Evaporator | Core replacement procedure |
| Blower Motor | Testing and replacement |
| Heater Core | Replacement procedure |
| Refrigerant | R-134a capacity and charging procedure |
Exterior body panels, interior trim, seats, and accessory installation procedures.
Door panel removal and installation, seat removal and track service, dashboard component removal, exterior trim and molding replacement, glass and window regulator service, sunroof maintenance and repair.
Diagnostic procedures for common issues and performance problems.
| Symptom | Possible Cause | Corrective Action |
|---|---|---|
| Engine won't start | Battery, starter, fuel system | Check battery voltage, fuel pressure, spark |
| Transmission slipping | Low fluid, worn clutches | Check fluid level and condition, pressure test |
| Brake vibration | Warped rotors | Inspect and machine or replace rotors |
| Electrical issues | Battery, alternator, grounds | Test charging system, check ground connections |
| A/C not cooling | Refrigerant leak, compressor | Check refrigerant pressure, compressor clutch |
Manufacturer-issued service bulletins addressing known issues and updated repair procedures.
Service Support: Contact Acura Customer Service at 1-800-382-2238 or visit acura.com