The 2006 Acura MDX Service Manual provides comprehensive technical information for maintenance, repair, and service procedures for the 2006 Acura MDX luxury SUV. This manual covers engine systems (J35A4 3.5L V6), transmission (5-speed automatic), drivetrain (VTM-4 all-wheel drive), suspension, brakes, electrical systems, HVAC, body components, and diagnostic procedures. Below are key sections for technical specifications, maintenance schedules, repair procedures, troubleshooting, and system diagnostics.
Technical specifications for the 2006 Acura MDX including engine, transmission, dimensions, and capacities.
| Specification | Description |
|---|---|
| Engine Type | J35A4 3.5L SOHC V6 VTEC |
| Horsepower | 265 hp @ 5800 rpm |
| Torque | 250 lb-ft @ 5000 rpm |
| Transmission | 5-speed automatic with SportShift |
| Drivetrain | VTM-4 all-wheel drive system |
| Fuel Capacity | 19.2 gallons |
| Curb Weight | 4,486 lbs |
| Wheelbase | 106.3 inches |
| Overall Length | 188.5 inches |
| Towing Capacity | 4,500 lbs (with accessory towing package) |
Recommended maintenance intervals and service procedures for optimal vehicle performance.
WARNING! Always use genuine Acura parts and fluids for optimal performance and warranty compliance.
Detailed service procedures for the J35A4 3.5L V6 engine and related components.
Service procedures for automatic transmission and VTM-4 all-wheel drive system.
Transmission Service: Fluid change, filter replacement, shift solenoid testing, valve body service.
VTM-4 System: Differential service, transfer case maintenance, drive shaft inspection.
Tip: Use only Honda DW-1 automatic transmission fluid for proper operation.
Complete brake system service including ABS and VSA (Vehicle Stability Assist).
WARNING! Always bleed brakes in correct sequence and use DOT 3 or DOT 4 brake fluid only.
Front and rear suspension service, steering system maintenance and alignment procedures.
| Component | Service Procedure |
|---|---|
| Front Struts | Replacement and alignment procedure |
| Rear Shocks | Removal and installation steps |
| Control Arms | Bushing replacement and ball joint service |
| Stabilizer Bars | Link and bushing replacement |
| Power Steering | Pump service, fluid flush, rack inspection |
| Wheel Alignment | Specifications and adjustment procedures |
Wiring diagrams, component locations, and electrical system diagnostics.
CAUTION! Disconnect battery before performing electrical work to prevent short circuits.
Heating, ventilation, and air conditioning system service and repair.
Supports climate control diagnostics, compressor service, and refrigerant handling.
WARNING! A/C system contains high pressure refrigerant - use proper safety equipment.
Body panel replacement, interior trim, and accessory service procedures.
Using diagnostic tools and interpreting trouble codes for various systems.
OBD-II diagnostics: Accessing and clearing trouble codes, live data monitoring, system tests.
Tip: Always verify repairs by test driving and re-scanning for codes.
| Symptom | Possible Cause | Corrective Action |
|---|---|---|
| Engine won't start | Battery, starter, ignition | Check battery voltage, test starter, verify spark and fuel delivery |
| Transmission slipping | Fluid level, solenoids | Check fluid level and condition, test shift solenoids, pressure test |
| ABS warning light | Wheel sensors, modulator | Scan for codes, test wheel speed sensors, check modulator |
| A/C not cooling | Refrigerant, compressor | Check refrigerant pressure, test compressor clutch, check fuses |
| Electrical issues | Battery, alternator, grounds | Load test battery, test alternator output, check ground connections |
Reset Procedures: Maintenance minder reset, sunroof initialization, power window reset.
Technical Support: Acura Client Relations 1-800-382-2238; www.acura.com