The 2006 Acura TL Service Manual provides comprehensive technical information for the maintenance, repair, and service of the 2006 Acura TL luxury sedan. This manual covers the 3.2L V6 engine, 5-speed automatic transmission, suspension systems, electrical systems, brake systems, heating and air conditioning, body components, and diagnostic procedures. Below are key sections for vehicle specifications, maintenance schedules, troubleshooting, repair procedures, and technical data.
Technical specifications for the 2006 Acura TL including engine, transmission, dimensions, and capacities.
| Specification | Description |
|---|---|
| Engine Type | 3.2L SOHC V6 VTEC |
| Horsepower | 258 hp @ 6200 rpm |
| Torque | 233 lb-ft @ 5000 rpm |
| Transmission | 5-speed automatic with Sequential SportShift |
| Drivetrain | Front-wheel drive |
| Fuel Capacity | 17.1 gallons |
| Curb Weight | 3,589 lbs |
| Overall Length | 190.1 inches |
| Wheelbase | 108.1 inches |
| Brake System | 4-wheel disc with ABS |
Recommended maintenance intervals and service procedures.
IMPORTANT! Severe driving conditions may require more frequent maintenance.
Detailed service procedures for the 3.2L V6 engine and related components.
WARNING! Always disconnect battery before performing engine service.
Service procedures for the 5-speed automatic transmission.
Wiring diagrams, component locations, and electrical system service.
Battery: Location in trunk, specifications, testing procedures.
Charging System: Alternator output test, voltage regulator specifications.
Starting System: Starter motor testing, solenoid operation.
Lighting Systems: Headlight adjustment, bulb replacement procedures.
Power Accessories: Window motors, door locks, seat adjustments.
Fuse Box Locations: Under-hood and interior fuse panel diagrams.
Complete brake system service and maintenance procedures.
CAUTION! Always use proper brake fluid and follow torque specifications.
Front and rear suspension components and steering system service.
| Component | Service Procedure |
|---|---|
| Front Struts | Replacement and alignment procedures |
| Rear Shocks | Removal and installation steps |
| Control Arms | Bushing replacement and ball joint inspection |
| Stabilizer Bars | Link and bushing replacement |
| Power Steering | Pump replacement and fluid service |
| Wheel Alignment | Specifications and adjustment procedures |
Climate control system service and repair procedures.
Supports complete A/C system diagnosis and repair.
WARNING! A/C system contains high pressure refrigerant - use proper equipment.
Body panel replacement and interior component service.
Door panel removal, window regulator replacement, seat disassembly.
OBD-II diagnostic trouble code retrieval and interpretation.
Scan Tool Usage: Connecting and operating diagnostic equipment.
Code Clearing: Proper procedure for clearing diagnostic codes.
Live Data: Interpreting sensor data and system parameters.
Component Testing: Step-by-step testing procedures for sensors and actuators.
| Symptom | Possible Cause | Corrective Action |
|---|---|---|
| Engine won't start | Battery, starter, fuel system | Check battery voltage, test starter, verify fuel pressure. |
| Transmission slipping | Low fluid, worn clutches | Check fluid level and condition, perform pressure test. |
| Brake vibration | Warped rotors | Inspect and replace brake rotors, check caliper operation. |
| A/C not cooling | Low refrigerant, compressor | Check refrigerant pressure, test compressor clutch. |
| Electrical issues | Fuses, grounds, wiring | Check all fuses, inspect ground connections, test wiring. |
Technical Support: Contact Acura dealer for technical assistance.
Parts Information: Genuine Acura parts recommended for all repairs.