The 2006 Acura TSX Service Manual provides comprehensive technical information for maintenance, repair, and service procedures for the 2006 Acura TSX model. This manual covers engine systems, transmission, suspension, brakes, electrical systems, body components, and troubleshooting guides. Designed for professional technicians and DIY enthusiasts, it includes detailed diagrams, specifications, and step-by-step instructions. Below are key sections covering maintenance schedules, technical specifications, repair procedures, and diagnostic information.
Technical specifications for the 2006 Acura TSX including engine, dimensions, capacities, and performance data.
| Specification | Details |
|---|---|
| Engine Type | 2.4L DOHC i-VTEC 4-cylinder |
| Horsepower | 205 hp @ 7000 rpm |
| Torque | 164 lb-ft @ 4500 rpm |
| Transmission | 6-speed manual or 5-speed automatic |
| Fuel Capacity | 17.1 gallons |
| Curb Weight | 3220 lbs (manual), 3265 lbs (automatic) |
| Wheelbase | 105.1 inches |
| Overall Length | 183.3 inches |
| Overall Width | 69.4 inches |
| Overall Height | 57.2 inches |
Recommended maintenance intervals and service procedures for optimal vehicle performance.
WARNING! Always use genuine Acura parts and fluids for optimal performance and warranty compliance.
Detailed service procedures for engine components and systems.
CAUTION! Always disconnect battery before working on electrical components. Allow engine to cool before servicing.
Service procedures for suspension components and steering system.
Front Suspension: Strut replacement, control arm service, ball joint inspection
Rear Suspension: Multi-link system service, alignment specifications
Steering System: Power steering pump service, rack and pinion repair, tie rod replacement
Wheels & Tires: Alignment specifications, tire pressure monitoring system reset
Complete brake system service and repair procedures.
Tip: Always replace brake components in axle sets and bed new pads properly.
Wiring diagrams and electrical component service.
WARNING! Disconnect battery before servicing electrical systems to prevent short circuits and component damage.
Body repair procedures and interior component service.
Exterior: Panel replacement, paint codes, glass service
Interior: Dashboard components, seat repair, trim removal
Doors: Window regulator service, lock mechanism repair
Safety Systems: Airbag system precautions and service warnings
Using diagnostic tools and troubleshooting techniques.
Essential safety procedures for all service work.
Always use jack stands when working under vehicle. Wear safety glasses and gloves. Properly dispose of fluids and hazardous materials. Follow all environmental regulations.
CAUTION! Airbag systems contain explosive devices - always disconnect battery and wait specified time before servicing.
| Symptom | Possible Cause | Corrective Action |
|---|---|---|
| Engine won't start | Battery, starter, fuel system | Check battery voltage, fuel pressure, spark |
| Poor acceleration | Clogged filter, sensor issues | Replace air filter, check MAF sensor |
| Brake vibration | Warped rotors | Resurface or replace brake rotors |
| Electrical issues | Battery, alternator, grounds | Test charging system, check ground connections |
| Transmission slipping | Low fluid, worn components | Check fluid level and condition |
Technical Support: Contact Acura dealer service department for complex issues
Parts Information: Use genuine Acura parts for all repairs