2010 Acura MDX Service Manual PDF

The 2010 Acura MDX Service Manual provides comprehensive technical information for maintenance, repair, and service procedures for the 2010 Acura MDX luxury SUV. This manual covers engine systems, transmission, suspension, brakes, electrical systems, heating and air conditioning, body components, and diagnostic procedures. Below are key sections for technical specifications, maintenance schedules, troubleshooting, and service procedures.

1. Vehicle Specifications 2. Maintenance Schedule 3. Engine Systems 4. Transmission Service 5. Brake Systems 6. Suspension & Steering 7. Electrical Systems 8. Heating & A/C 9. Body & Interior 10. Diagnostic Procedures 11. Troubleshooting Guide

Vehicle Specifications

Technical specifications for the 2010 Acura MDX including engine, transmission, dimensions, and capacities.

SpecificationDescription
Engine Type3.7L SOHC V6 VTEC
Horsepower300 hp @ 6,200 rpm
Torque275 lb-ft @ 5,000 rpm
Transmission5-speed automatic with SportShift
DrivetrainSuper Handling All-Wheel Drive (SH-AWD)
Fuel Capacity21.0 gallons
Curb Weight4,478 lbs
Overall Length191.6 inches
Wheelbase108.3 inches
Towing Capacity5,000 lbs

Maintenance Schedule

Recommended maintenance intervals and service requirements for optimal vehicle performance.

  1. Oil and filter change: Every 7,500 miles or 12 months
  2. Tire rotation: Every 7,500 miles
  3. Air filter replacement: Every 30,000 miles
  4. Spark plug replacement: Every 105,000 miles
  5. Transmission fluid: Every 30,000 miles
  6. Brake fluid: Every 3 years regardless of mileage
  7. Coolant replacement: Every 120,000 miles or 10 years

WARNING! Always use genuine Acura parts and fluids for optimal performance and warranty compliance.

Engine Systems

Detailed service procedures for the 3.7L V6 engine and related components.

  1. Engine removal and installation procedures
  2. Cylinder head service and valve adjustment
  3. Timing belt replacement (interval: 105,000 miles)
  4. Fuel system service and injector cleaning
  5. Ignition system maintenance
  6. Emission control systems
  7. Cooling system service

CAUTION! Always disconnect battery before performing electrical work. Use proper lifting equipment for engine removal.

Transmission Service

Brake Systems

Complete brake system service including disc brakes, ABS, and electronic brake distribution.

Front Brakes: Ventilated discs, 12.6-inch diameter. Rear Brakes: Solid discs, 13.1-inch diameter.

Brake Pad Replacement: Wear indicator inspection, pad thickness specifications. ABS Service: Wheel speed sensor testing, hydraulic modulator service. Parking Brake: Cable adjustment procedures. Brake Fluid: DOT 3 or DOT 4, bleeding procedures.

Suspension & Steering

Front and rear suspension components, steering system service, and wheel alignment.

  1. Front suspension: MacPherson strut with lower L-arms
  2. Rear suspension: Multi-link with trailing arms
  3. Steering type: Variable power-assisted rack-and-pinion
  4. Wheel alignment specifications and adjustment procedures
  5. Shock absorber and strut replacement
  6. Stabilizer bar and bushing service

Tip: Always perform wheel alignment after suspension component replacement.

Electrical Systems

Complete electrical system diagnostics, wiring diagrams, and component testing.

  1. Battery: Testing and replacement procedures
  2. Charging system: Alternator testing and replacement
  3. Starting system: Starter motor service
  4. Lighting systems: Headlight adjustment and bulb replacement
  5. Power accessories: Window, lock, and seat motor service
  6. Fuse box locations and circuit descriptions
  7. Wiring harness routing and connector locations

WARNING! Disconnect battery before electrical service to prevent short circuits and module damage.

Heating & A/C

Climate control system service including compressor, condenser, and heater core.

Body & Interior

Body panel replacement, interior trim service, and glass installation procedures.

CAUTION! Use proper safety equipment when working with airbag systems and glass components.

Diagnostic Procedures

Using diagnostic tools, reading trouble codes, and system performance testing.

Troubleshooting Guide

SymptomPossible CauseCorrective Action
Engine won't startBattery/ignition/fuelCheck battery voltage, spark plugs, fuel pressure, starter motor.
Transmission slippingFluid level/solenoidsCheck fluid level and condition, test shift solenoids, inspect clutch packs.
Brake vibrationRotor warpageMeasure rotor runout, resurface or replace rotors, check caliper operation.
Electrical issuesBattery/alternatorTest charging system, check ground connections, inspect wiring harness.
OverheatingCooling systemCheck coolant level, test thermostat, inspect water pump, check radiator.

Reset Procedures: Maintenance minder reset, ECM reset procedures included.

Technical Support: Contact Acura technical assistance for complex diagnostic issues.

2010 Acura MDX Service Manual PDF © - All Rights Reserved 2025