2010 Acura TL Factory Service Manual

The 2010 Acura TL Factory Service Manual provides comprehensive technical information for proper maintenance, repair, and service procedures for the 2010 Acura TL model. This manual covers engine systems, transmission, chassis, electrical systems, body components, and all factory specifications required for professional servicing. Below are key sections for maintenance procedures, specifications, troubleshooting, and technical data.

1. General Information 2. Maintenance Procedures 3. Engine Systems 4. Transmission 5. Chassis & Suspension 6. Electrical Systems 7. Body & Interior 8. Technical Specifications 9. Troubleshooting 10. Safety Precautions 11. Warranty Information

General Information

Overview of 2010 Acura TL model features and service manual organization.

SectionDescription
Vehicle IdentificationVIN decoding and model identification
Manual OrganizationChapter layout and navigation guide
Service CategoriesMaintenance schedules and service intervals
Tool RequirementsSpecial tools and equipment needed
Safety SymbolsWarning and caution symbol explanations

Maintenance Procedures

Standard maintenance procedures and service intervals.

  1. Oil and filter change: Every 7,500 miles or 12 months
  2. Tire rotation: Every 7,500 miles
  3. Brake inspection: Every 15,000 miles
  4. Fluid checks: Engine oil, transmission, brake, coolant
  5. Filter replacement: Air, cabin, fuel filters

WARNING! Always use genuine Acura parts and fluids for optimal performance and warranty compliance.

Engine Systems

3.5L and 3.7L V6 engine service procedures and specifications.

Transmission

Automatic and manual transmission service procedures.

Automatic: 5-speed automatic with Sequential SportShift

Manual: 6-speed manual transmission available

Service: Fluid change intervals, shift cable adjustment, clutch replacement procedures, transmission removal and installation.

Chassis & Suspension

Suspension system maintenance and repair procedures.

  1. Front suspension: MacPherson strut design
  2. Rear suspension: Multi-link design
  3. Steering: Power-assisted rack-and-pinion
  4. Brakes: 4-wheel disc with ABS
  5. Wheel alignment: Specifications and adjustment procedures

Tip: Always check torque specifications during reassembly.

Electrical Systems

Electrical system diagnosis and repair procedures.

  1. Battery: Testing and replacement procedures
  2. Charging System: Alternator testing and replacement
  3. Starting System: Starter motor service
  4. Lighting: Headlight, taillight, and interior lighting
  5. Audio/Navigation: System diagnosis and component replacement
  6. Climate Control: A/C and heating system service

WARNING! Disconnect battery before performing electrical work to prevent short circuits.

Body & Interior

Body components and interior system service procedures.

Exterior: Panel replacement, paint codes, glass installation

Interior: Seat removal, dashboard components, trim pieces

Doors: Window regulator, lock mechanism, mirror adjustment

Technical Specifications

Complete technical specifications and torque values.

ComponentSpecification
Engine Oil Capacity4.5 quarts (with filter)
Coolant Capacity7.4 quarts
Transmission Fluid3.1 quarts (drain and refill)
Fuel Tank Capacity18.5 gallons
Tire Pressure32 PSI (all around)
Wheel Size17-inch or 18-inch alloys

Troubleshooting

Common issues and diagnostic procedures.

SymptomPossible CauseCorrective Action
Engine won't startBattery, starter, fuel systemCheck battery voltage, fuel pressure, spark
Transmission shifting hardFluid level, sensorsCheck fluid level and condition, scan for codes
Brake vibrationRotor warpage, padsInspect rotors, replace if warped
Electrical issuesFuses, grounds, batteryCheck fuses, clean battery terminals
AC not coolingRefrigerant, compressorCheck refrigerant pressure, compressor operation

Safety Precautions

Important safety information for service technicians.

Always use proper lifting equipment, wear safety glasses, disconnect battery before electrical work, use jack stands when working under vehicle, and follow all environmental regulations for fluid disposal.

CAUTION! Airbag systems contain explosive devices - always disable before working on steering column or dashboard.

Warranty Information

Factory warranty coverage and service requirements.

Basic Warranty: 4 years/50,000 miles. Powertrain: 6 years/70,000 miles. Corrosion: 5 years/unlimited miles. Maintain proper service records for warranty claims. For warranty service, contact authorized Acura dealership.

2010 Acura TL Factory Service Manual © - All Rights Reserved 2025