The 2010 Acura TL Shop Manual provides comprehensive technical information for servicing and repairing the 2010 Acura TL luxury sports sedan. This manual covers all major systems including the 3.5L V6 and 3.7L V6 engines, 5-speed automatic transmission, 6-speed manual transmission, suspension, brakes, electrical systems, body components, and advanced features like the Acura/ELS Surround Sound System and navigation system. Below are key sections for technical specifications, maintenance procedures, troubleshooting, and repair instructions.
Technical specifications for the 2010 Acura TL models including base and SH-AWD versions.
| Specification | Description |
|---|---|
| Engine Type | 3.5L V6 (Base) / 3.7L V6 (SH-AWD) |
| Horsepower | 280 hp @ 6200 rpm (3.5L) / 305 hp @ 6300 rpm (3.7L) |
| Torque | 254 lb-ft @ 5000 rpm (3.5L) / 273 lb-ft @ 5000 rpm (3.7L) |
| Transmission | 5-speed automatic / 6-speed manual (SH-AWD) |
| Drivetrain | Front-wheel drive / SH-AWD (Super Handling All-Wheel Drive) |
| Fuel System | Programmed Fuel Injection (PGM-FI) |
| Brake System | 4-wheel disc brakes with ABS |
| Suspension | Front: Double wishbone / Rear: Multi-link |
| Wheelbase | 109.3 inches |
| Curb Weight | 3,694 lbs (Base) / 3,968 lbs (SH-AWD) |
Detailed procedures for engine maintenance, repair, and diagnostics.
WARNING! Always disconnect battery before working on engine systems. Use proper lifting equipment for engine removal.
Service procedures for automatic and manual transmissions.
CAUTION! Use only specified transmission fluids. Improper fluid can damage transmission components.
Complete brake system service and repair procedures.
Front Brakes: 12.6-inch ventilated discs, single-piston calipers. Rear Brakes: 12.2-inch solid discs, single-piston calipers.
Brake pad replacement: Proper bedding procedure required. Rotor machining: Maximum discard thickness specifications. ABS system: Diagnostic trouble code reading and component testing. Brake fluid: DOT 3 or DOT 4, replace every 3 years.
Wiring diagrams, component locations, and diagnostic procedures.
Tip: Always use factory scan tool for accurate diagnostic trouble code reading.
Body panel replacement, interior component service, and trim procedures.
WARNING! Disable airbag system before working on interior components. Wait 3 minutes after battery disconnect.
Factory recommended maintenance intervals and procedures.
Oil and filter: Every 7,500 miles or 12 months. Tire rotation: Every 7,500 miles. Air filter: Every 30,000 miles. Cabin air filter: Every 15,000 miles. Spark plugs: Every 105,000 miles. Timing belt: 105,000 miles or 7 years. Coolant: Every 120,000 miles or 10 years. Brake fluid: Every 3 years regardless of mileage.
Using factory diagnostic equipment and troubleshooting methods.
CAUTION! Always follow diagnostic procedures in sequence. Do not skip steps.
Essential safety procedures for all repair work.
Always use jack stands - never work under vehicle supported only by jack. Disconnect battery before electrical work. Use proper personal protective equipment. Handle fluids properly - use drip pans and dispose according to regulations. Follow torque specifications exactly. Use factory service information for all procedures.
| Symptom | Possible Cause | Corrective Action |
|---|---|---|
| Engine won't start | Battery, starter, fuel pump | Check battery voltage, test starter, listen for fuel pump prime. |
| Transmission shifting hard | Fluid level, sensors | Check ATF level, scan for transmission codes, test shift solenoids. |
| Brake vibration | Warped rotors | Measure rotor thickness, machine or replace rotors as needed. |
| Electrical issues | Battery, alternator, grounds | Load test battery, check alternator output, inspect ground connections. |
| Steering wheel vibration | Wheel balance, alignment | Balance wheels, check alignment, inspect suspension components. |
Reset Procedures: Maintenance minder reset, window initialization, sunroof reset.
Technical Support: Acura Technical Information System (TIS) for latest updates.