The 2014 Acura ILX Service Manual provides comprehensive technical information for maintenance, repair, and service procedures for the Acura ILX model year 2014. This manual covers engine systems, transmission, suspension, brakes, electrical systems, HVAC, and body components. Below are key sections for maintenance schedules, technical specifications, troubleshooting, repair procedures, and safety information.
Technical specifications for the 2014 Acura ILX including engine options, dimensions, capacities, and performance data.
| Specification | Description |
|---|---|
| Engine Options | 2.0L I4, 2.4L I4 |
| Horsepower | 150-201 hp depending on engine |
| Transmission | 5-speed automatic, 6-speed manual |
| Fuel Capacity | 13.2 gallons |
| Curb Weight | 2,894-2,966 lbs |
| Wheelbase | 105.1 inches |
| Overall Length | 179.1 inches |
| Brake System | 4-wheel disc brakes with ABS |
| Fuel Economy | 24-35 mpg combined |
| Oil Capacity | 4.2-4.4 quarts |
Recommended maintenance intervals for optimal vehicle performance and longevity.
WARNING! Always use Acura-approved fluids and follow specified torque values during service.
Service procedures for engine components including timing system, fuel system, and emissions control.
CAUTION! Always disconnect battery before working on electrical components. Use proper lifting equipment.
Brake system service including pad replacement, rotor service, and ABS diagnostics.
Front Brakes: Pad replacement, rotor resurfacing/replacement, caliper service
Rear Brakes: Pad/shoe replacement, drum/rotor service, parking brake adjustment
ABS System: Wheel speed sensor replacement, hydraulic control unit service, bleeding procedures
Brake Fluid: DOT 3 or DOT 4 specification, bleeding sequence
Front and rear suspension components, alignment specifications, and steering system service.
Tip: Always check suspension components for wear during tire rotation.
Battery, charging system, starting system, and accessory electrical component service.
WARNING! Disconnect battery negative terminal before electrical work to prevent short circuits.
Heating, ventilation, and air conditioning system service and repair procedures.
WARNING! Only certified technicians should service A/C systems. Use proper refrigerant handling equipment.
Body panel repair, interior component service, and glass replacement procedures.
Using diagnostic tools, reading trouble codes, and systematic troubleshooting approaches.
CAUTION! Always follow diagnostic flow charts in sequence. Do not skip diagnostic steps.
| Symptom | Possible Cause | Corrective Action |
|---|---|---|
| Engine won't start | Battery, starter, fuel system | Check battery voltage, fuel pressure, spark |
| Rough idle | Vacuum leak, dirty injectors | Check for vacuum leaks, clean throttle body |
| Brake vibration | Warped rotors | Resurface or replace rotors |
| Transmission slipping | Low fluid, worn clutches | Check fluid level and condition |
| Electrical issues | Bad grounds, faulty modules | Check ground connections, scan for codes |
Reset Procedures: ECU reset, maintenance minder reset, TPMS reset
Technical Support: Acura Technical Service Bulletin references and dealer support contacts