96 Acura Integra LS Manual Transmission

The 1996 Acura Integra LS features a 5-speed manual transmission paired with a 1.8L B18B1 engine producing 142 horsepower. This front-wheel drive transmission offers smooth shifting, durable synchronizers, and excellent driving engagement. Below are key sections covering specifications, operation, maintenance, troubleshooting, and repair procedures.

1. Transmission Specifications 2. Operation and Shifting 3. Maintenance Schedule 4. Fluid Requirements 5. Clutch System 6. Common Issues 7. Troubleshooting 8. Repair Procedures 9. Performance Upgrades 10. Warranty Information 11. Technical Support

Transmission Specifications

Key components: 5-speed manual gearbox, hydraulic clutch system, limited-slip differential (optional), and cable-operated shifter mechanism.

Specification	Details
Transmission Type	5-speed manual, front-wheel drive
Gear Ratios	1st: 3.230, 2nd: 1.900, 3rd: 1.269, 4th: 0.966, 5th: 0.742, Reverse: 3.000
Final Drive Ratio	4.266:1
Clutch Type	Hydraulic, single disc dry clutch
Fluid Capacity	2.2 quarts (2.1 liters)
Fluid Type	Honda MTF or equivalent 10W-30 motor oil
Shift Pattern	H-pattern with reverse left and up
Synchro Type	Carbon-lined synchronizers
Case Material	Aluminum alloy

Operation and Shifting

Proper shifting technique ensures longevity and smooth operation.

Clutch operation: Depress clutch fully before shifting; release smoothly.
Shifting sequence: Follow H-pattern; reverse requires lifting collar.
Rev-matching: Recommended for downshifting to reduce synchro wear.
Cold weather: Allow transmission to warm up before aggressive shifting.

WARNING! Do not rest hand on shifter while driving; avoid forced shifts.

Maintenance Schedule

Regular maintenance ensures optimal performance and longevity.

Fluid change: Every 30,000 miles or 2 years.
Clutch inspection: Every 15,000 miles.
Shift linkage: Lubricate every 10,000 miles.
Transmission mount: Inspect every 30,000 miles.

CAUTION! Use only recommended fluids; improper lubricants can damage synchronizers.

Fluid Requirements

Recommended Fluid: Honda Manual Transmission Fluid (MTF)
Alternative: 10W-30 motor oil meeting API service classification
Capacity: 2.2 quarts (2.1 liters)
Change Interval: 30,000 miles or 2 years
Drain Plug: 3/8" square drive, magnetic tip
Fill Plug: 17mm hex, located on front side

Clutch System

Hydraulic clutch system with master cylinder, slave cylinder, and release bearing.

Components: Clutch pedal, master cylinder, hydraulic line, slave cylinder, release fork, pressure plate, clutch disc, flywheel.

Adjustment: Self-adjusting hydraulic system; bleed if spongy pedal. Wear indicators: Slipping under acceleration, difficult shifting, clutch pedal near floor. Replacement: Typically 60,000-100,000 miles depending on driving habits.

Common Issues

Grinding gears: Worn synchronizers or low fluid. Difficulty shifting: Clutch hydraulic issues or linkage problems.

Check fluid level and condition first.
Inspect clutch master and slave cylinders for leaks.
Verify shift linkage adjustment and lubrication.

Tip: Address shifting issues promptly to prevent transmission damage.

Playing DVD Media

Supports DVD-Video, audio CDs.

Insert disc: Press OPEN/CLOSE, load DVD.
Play: Press PLAY; select title/chapter with numeric buttons or arrows.
Stop: Press STOP (twice for complete stop); eject with OPEN/CLOSE.
Skip: PREV/NEXT for chapters/tracks.
Random/shuffle: Press P.MODE during play.
Zoom: Press ZOOM to magnify/reduce.
Angle change: Use ANGLE button if multiple angles available.
Last memory: Resume play from stop point on power on.

WARNING! Do not force disc; eject properly. Keep fingers from slot.

Accessibility Features

Closed Captions: Enable in DVD setup (On/Off). Parental Controls: Block by movie/TV ratings in FEATURES menu (password 9999).

Care & Cleaning

Unplug before cleaning. Use dry cloth only; no liquids or aerosols.

CAUTION! Do not spray liquids; keep away from heat and moisture.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © 2006 Insignia; trademarks of Best Buy Enterprise Services, Inc. Macrovision: Incorporates copy protection technology. For support, visit www.insigniaproducts.com or contact 1-877-467-4289.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Grinding when shifting	Worn synchronizers/low fluid	Check fluid level; replace if contaminated; inspect synchros.
Difficulty engaging gears	Clutch not disengaging	Bleed hydraulic system; check master/slave cylinders.
Transmission noise	Worn bearings/low fluid	Check fluid level; inspect input/output shaft bearings.
Leaking fluid	Seals or gaskets	Identify leak source; replace axle seals or case gaskets.
Vibration in gear	Worn mounts or CV joints	Inspect transmission mounts and CV axle condition.

Reset: Menu > System > Reset if available.

Service: 1-877-467-4289; www.insigniaproducts.com