Acura Integra Auto to Manual Conversion Kit

The Acura Integra Auto to Manual Conversion Kit is a comprehensive solution for converting your automatic transmission Acura Integra to a manual transmission system. This kit includes all necessary components for a complete conversion: manual transmission assembly, clutch kit, flywheel, pedal assembly, shifter mechanism, hydraulic lines, mounting brackets, and all required hardware. Compatible with various Acura Integra models from 1994-2001, this conversion enhances driving performance, improves fuel efficiency, and provides greater control over gear selection.

1. Kit Components 2. Compatibility 3. Installation Requirements 4. Technical Specifications 5. Installation Process 6. Performance Benefits 7. Maintenance Guidelines 8. Warranty Information 9. Safety Precautions 10. Technical Support 11. Troubleshooting

Kit Components

Complete conversion kit includes all essential parts for automatic to manual transmission conversion.

Component	Description
Manual Transmission	5-speed manual transmission assembly
Clutch Kit	Complete clutch kit with pressure plate and disc
Flywheel	Lightweight performance flywheel
Pedal Assembly	Manual clutch and brake pedal set
Shifter Mechanism	Complete shifter assembly with linkage
Master Cylinder	Clutch master cylinder
Slave Cylinder	Clutch slave cylinder
Hydraulic Lines	Complete hydraulic line set
Mounting Brackets	All necessary transmission mounts
Hardware Kit	Complete bolt and fastener set

Compatibility

Designed specifically for Acura Integra models with automatic transmission.

Acura Integra 1994-1997 (DB7 chassis)
Acura Integra 1998-2001 (DC4 chassis)
Compatible with 1.8L B18B and B18C engines
Requires manual transmission ECU or ECM reprogramming

WARNING! Verify vehicle model and year before purchase. Professional installation recommended.

Installation Requirements

Professional installation recommended. Basic automotive mechanical skills required.

Vehicle lift or jack stands for proper access
Complete mechanic's tool set
Transmission jack for safe removal/installation
Torque wrench for proper bolt tightening
Bleeding kit for hydraulic system
ECU reprogramming capability

CAUTION! Installation requires significant mechanical expertise. Incorrect installation may cause vehicle damage.

Technical Specifications

Transmission Type: 5-speed manual
Gear Ratios: 3.230 (1st), 1.900 (2nd), 1.360 (3rd), 1.034 (4th), 0.787 (5th)
Final Drive: 4.400:1
Clutch Type: Organic performance clutch
Flywheel Weight: 12.5 lbs (lightweight)
Fluid Capacity: 2.2 quarts MTF
Installation Time: 8-12 hours (professional)
Weight: Complete kit approximately 85 lbs

Installation Process

Complete step-by-step installation guide included with kit.

Disconnect battery and drain transmission fluid
Remove automatic transmission and torque converter
Install manual transmission mounting brackets
Install clutch pedal assembly and hydraulic system
Mount flywheel and install clutch assembly
Install manual transmission and shifter mechanism
Connect hydraulic lines and bleed system
Install driveshaft and exhaust components
Reprogram ECU for manual transmission operation
Test operation and adjust clutch engagement

Performance Benefits

Conversion from automatic to manual transmission provides significant performance improvements.

Benefit	Description
Improved Acceleration	Better power transfer and reduced drivetrain loss
Enhanced Control	Direct gear selection for optimal performance
Fuel Efficiency	Up to 15% improvement in fuel economy
Reduced Maintenance	Simpler transmission design with fewer components
Higher Resale Value	Manual transmission models often command premium prices

Maintenance Guidelines

Proper maintenance ensures long-term reliability of your manual transmission conversion.

Change transmission fluid every 30,000 miles
Inspect clutch system every 15,000 miles
Check hydraulic fluid level monthly
Lubricate shifter linkage every oil change
Monitor for unusual noises or vibration

Tip: Use only recommended manual transmission fluid for optimal performance.

Warranty Information

Limited warranty coverage for conversion kit components.

Transmission: 12 months/unlimited mileage
Clutch Components: 6 months/12,000 miles
Hardware: Lifetime against manufacturing defects
Labor: Not covered - installation warranty through installer

NOTE: Warranty void if improper installation or racing use detected.

Safety Precautions

Critical safety considerations for installation and operation.

Always use jack stands - never work under vehicle supported only by jack
Wear safety glasses during installation
Ensure transmission is properly secured before removal
Bleed hydraulic system completely to prevent clutch failure
Test operation in safe area before road use

WARNING! Improper installation can lead to transmission failure and vehicle accidents.

Technical Support

Comprehensive support available for installation and troubleshooting.

Phone Support: 1-800-INTEGRA-KIT (Mon-Fri 8AM-6PM EST)
Email Support: [email protected]
Online Resources: Installation videos and FAQs at www.integracoversion.com
Installation Network: Certified installers nationwide

Troubleshooting

Symptom	Possible Cause	Corrective Action
Difficulty shifting	Hydraulic air in system	Bleed clutch hydraulic system completely
Clutch slipping	Improper adjustment	Adjust clutch pedal free play to specification
Gear grinding	Low transmission fluid	Check and fill transmission fluid to proper level
Vibration	Improper installation	Check transmission mounts and alignment
Clutch not disengaging	Master cylinder issue	Inspect master cylinder and hydraulic lines

Professional Assistance: Contact certified installer for complex issues.

Emergency Support: 1-800-INTEGRA-KIT