Acura Integra Manual Rack

The Acura Integra Manual Rack is a precision steering component designed for the Acura Integra series, providing direct mechanical steering response without power assistance. This manual steering rack offers improved road feel, reduced complexity, and enhanced reliability for performance driving applications. Below are key sections covering features, installation, maintenance, specifications, and troubleshooting.

1. Features at a Glance 2. Installation Procedure 3. Technical Specifications 4. Maintenance Guidelines 5. Compatibility Information 6. Performance Benefits 7. Troubleshooting Guide 8. Warranty Information

Features at a Glance

Key components: Manual steering rack assembly, tie rods, mounting brackets, and hardware.

Feature	Description
Direct mechanical steering	No hydraulic or electric power assistance
Precision gear ratio	Optimized for responsive handling and control
Heavy-duty construction	Durable materials for long-lasting performance
OEM fitment	Designed for direct replacement in Acura Integra models
Corrosion-resistant finish	Protective coating for extended service life
Precision ball joints	High-quality components for accurate steering response
Minimal maintenance	No hydraulic fluid or electrical components to maintain
Weight reduction	Lighter than power steering systems

Installation Procedure

Professional installation recommended. Ensure vehicle is properly supported.

Lift vehicle and secure on jack stands; remove front wheels.
Disconnect tie rods from steering knuckles using appropriate tools.
Remove steering column coupling from rack input shaft.
Unbolt and remove existing steering rack from chassis mounts.
Install new manual rack using provided hardware and torque to specifications.
Reconnect tie rods and steering column coupling.
Perform wheel alignment to factory specifications.

WARNING! Always use proper safety equipment and follow torque specifications. Incorrect installation may affect vehicle handling and safety.

Technical Specifications

Gear Ratio: 20:1 (standard manual ratio)
Lock-to-Lock Turns: 3.5 turns
Thread Size: M14x1.5 for tie rod ends
Mounting Points: 2-point chassis mounting
Material: Steel housing with hardened steel gears
Finish: Zinc plating with black oxide coating

Weight: Approximately 8.5 lbs (3.85 kg)

Torque Specifications: Mounting bolts: 45-55 ft-lbs, Tie rod nuts: 35-40 ft-lbs

Maintenance Guidelines

Regular inspection and lubrication ensure optimal performance.

Inspect rubber boots for cracks or damage every 6 months.

Check for play in tie rod ends during routine maintenance.

Lubricate input shaft seal with high-temperature grease annually.

Verify mounting bolt torque every 12 months or 12,000 miles.

Inspect for fluid leaks (if converting from power steering).

CAUTION! Do not over-tighten adjustment mechanisms. Excessive force may damage internal components.

Compatibility Information

Designed specifically for Acura Integra models with direct bolt-on compatibility.

Model Years Integra Models Notes

1994-2001 Integra LS, GS, GS-R Direct replacement

1994-2001 Integra Type R May require minor modification

1990-1993 Second Generation Integra Bracket adaptation required

Note: Verify specific model compatibility before purchase and installation.

Performance Benefits

The manual steering rack provides several advantages for performance driving.

Enhanced Road Feel: Direct mechanical connection provides superior feedback

Weight Reduction: Eliminates power steering pump, fluid, and lines

Improved Reliability: Fewer components means fewer potential failure points

Consistent Performance: No variation in assist across engine RPM range

Maintenance Simplicity: No hydraulic fluid changes or pump replacements

Track Performance: Preferred by autocross and track enthusiasts

Troubleshooting Guide

Symptom Possible Cause Corrective Action

Excessive steering play Worn tie rod ends or internal wear Inspect and replace worn components; check adjustment

Hard steering effort Low tire pressure or binding components Check tire pressure; inspect for binding in linkage

Steering not returning to center Alignment issues or binding Perform wheel alignment; check for suspension binding

Knocking sounds when turning Loose mounting or worn components Check mounting bolt torque; inspect tie rods and bushings

Vibration through steering wheel Unbalanced wheels or worn components Balance wheels; check for worn tie rod ends or bushings

Professional Service: Consult qualified technician for complex steering issues.

Warranty Information

Limited lifetime warranty against manufacturing defects. Warranty covers material and workmanship for the original purchaser. Does not cover damage from improper installation, accidents, or normal wear and tear. Proof of purchase required for warranty claims.

Contact: For warranty claims or technical support, contact manufacturer directly with proof of purchase and installation details.

Acura Integra Manual Rack User Manual © - All Rights Reserved 2025

Model Years	Integra Models	Notes
1994-2001	Integra LS, GS, GS-R	Direct replacement
1994-2001	Integra Type R	May require minor modification
1990-1993	Second Generation Integra	Bracket adaptation required

Symptom	Possible Cause	Corrective Action
Excessive steering play	Worn tie rod ends or internal wear	Inspect and replace worn components; check adjustment
Hard steering effort	Low tire pressure or binding components	Check tire pressure; inspect for binding in linkage
Steering not returning to center	Alignment issues or binding	Perform wheel alignment; check for suspension binding
Knocking sounds when turning	Loose mounting or worn components	Check mounting bolt torque; inspect tie rods and bushings
Vibration through steering wheel	Unbalanced wheels or worn components	Balance wheels; check for worn tie rod ends or bushings