Acura Legend Manual Transmission Rebuild Kit

The Acura Legend Manual Transmission Rebuild Kit is a comprehensive solution for restoring and maintaining the manual transmission system in Acura Legend vehicles. This complete kit includes all necessary components for a full transmission overhaul, designed specifically for Acura Legend models with manual transmission. Below are key sections covering kit contents, compatibility, installation procedures, specifications, and maintenance guidelines.

1. Kit Contents and Components 2. Vehicle Compatibility 3. Installation Requirements 4. Technical Specifications 5. Installation Procedure 6. Tools Required 7. Maintenance Guidelines 8. Warranty Information 9. Safety Precautions 10. Technical Support 11. Troubleshooting

Kit Contents and Components

Complete rebuild kit includes all essential components for manual transmission restoration.

Component	Description
Synchronizer Rings	Complete set of brass synchronizer rings for all gears
Bearings	Full bearing kit including input/output shaft bearings
Seals and Gaskets	Complete seal and gasket set for transmission housing
Shift Forks	Replacement shift forks and related components
Gear Set	Optional gear set replacement (depending on kit version)
Input/Output Shafts	Precision machined replacement shafts
Shift Linkage Bushings	Complete bushing set for shift linkage restoration
Transmission Fluid	Recommended transmission fluid specification
Hardware Kit	Complete bolt and fastener replacement set
Installation Guide	Detailed step-by-step installation manual

Vehicle Compatibility

Designed specifically for Acura Legend manual transmission models.

Acura Legend (1991-1995) with manual transmission
Acura Legend Coupe (1991-1995) manual transmission
Acura Legend Sedan (1991-1995) manual transmission
Compatible with both 5-speed and 6-speed manual transmissions

NOTE! Verify transmission type and model year before purchase. Not compatible with automatic transmissions.

Installation Requirements

Professional installation recommended. Basic mechanical knowledge required.

Vehicle lift or jack stands for proper access
Clean, well-lit workspace
Transmission fluid drain pan
Proper safety equipment (gloves, safety glasses)
Approximately 6-8 hours installation time for experienced mechanic

WARNING! Transmission components are heavy; use proper lifting equipment. Ensure vehicle is securely supported.

Technical Specifications

Transmission Type: Manual 5-speed/6-speed
Material: OEM-grade components
Bearing Type: High-performance sealed bearings
Seal Material: Viton rubber for superior heat resistance
Gear Ratios: Factory specification maintained
Fluid Capacity: 2.5-3.0 quarts transmission fluid
Temperature Range: -40°F to 300°F operating temperature
Warranty: Limited 12-month warranty

Installation Procedure

Follow these steps for proper transmission rebuild installation.

Drain transmission fluid completely
Remove transmission from vehicle following factory service manual
Disassemble transmission components in clean workspace
Inspect all components for wear and damage
Replace all components included in rebuild kit
Reassemble transmission with new seals and gaskets
Reinstall transmission in vehicle
Fill with specified transmission fluid
Test operation and check for leaks

CAUTION! Torque all fasteners to factory specifications. Use thread locker where specified.

Tools Required

Professional tool set required for proper installation.

Tool	Purpose
Transmission Jack	For safe transmission removal and installation
Torque Wrench	For proper fastener torque specifications
Bearing Puller/Installer	For bearing replacement
Snap Ring Pliers	Internal and external snap ring removal
Seal Driver Set	For proper seal installation
Impact Gun	For stubborn fastener removal
Dial Indicator	For shaft endplay measurement
Cleaner/Degreaser	For component cleaning

Maintenance Guidelines

Proper maintenance ensures long transmission life.

Change transmission fluid every 30,000 miles
Check for leaks regularly
Monitor shift quality and engagement
Listen for unusual noises during operation
Inspect shift linkage for wear

Recommended Fluid: Honda/Acura Genuine MTF or equivalent

Warranty Information

Limited warranty coverage for manufacturing defects.

Duration: 12 months from date of purchase
Coverage: Manufacturing defects in materials and workmanship
Exclusions: Improper installation, misuse, normal wear
Claim Process: Contact manufacturer with proof of purchase

NOTE: Professional installation required for warranty validation.

Safety Precautions

Critical safety measures during installation and operation.

Always use jack stands - never work under vehicle supported only by jack
Wear safety glasses during disassembly
Use transmission jack for heavy components
Work in well-ventilated area
Keep work area clean and organized

WARNING! Transmission fluid is slippery - clean spills immediately to prevent falls.

Technical Support

Manufacturer support and contact information.

For technical assistance during installation or for warranty claims, contact:

Technical Support: 1-800-TRANSMISSION
Email Support: [email protected]
Online Resources: www.acuralegendtransmissionkits.com
Business Hours: Monday-Friday 8:00 AM - 5:00 PM EST

Troubleshooting

Symptom	Possible Cause	Corrective Action
Difficulty shifting	Incorrect fluid level	Check and adjust transmission fluid level
Grinding noise	Synchronizer issues	Inspect synchronizer rings and gears
Fluid leaks	Seal installation	Check seal installation and replace if necessary
Vibration	Improper assembly	Verify proper component alignment and torque
No gear engagement	Shift linkage	Inspect and adjust shift linkage components

Professional Assistance: If problems persist, consult certified transmission specialist.

Support: 1-800-TRANSMISSION; www.acuralegendtransmissionkits.com