Acura Manual Gear Oil

Acura manual gear oil is specially formulated for manual transmissions in Acura vehicles, providing optimal lubrication, wear protection, and smooth shifting performance. This guide covers specifications, compatibility, application procedures, maintenance intervals, and troubleshooting for Acura manual transmission fluids.

Product Specifications

Acura genuine manual transmission fluid meets or exceeds OEM requirements for smooth operation and longevity.

Vehicle Compatibility

Recommended for Acura vehicles with manual transmissions.

1. Acura Integra (all manual transmission models)
2. Acura RSX (5-speed and 6-speed manual)
3. Acura TSX (manual transmission versions)
4. Acura TL (manual transmission models)
5. Acura ILX (6-speed manual)

WARNING! Do not use in automatic transmissions or CVT units. Verify compatibility with your specific model year.

Installation Procedure

Proper installation ensures optimal transmission performance and longevity.

1. Lift vehicle securely and place on jack stands
2. Locate transmission drain plug and place drain pan underneath
3. Remove drain plug and allow old fluid to drain completely
4. Clean drain plug and reinstall with new washer
5. Locate fill plug on transmission side
6. Use fluid pump to add new gear oil until it reaches fill hole
7. Reinstall fill plug and tighten to specified torque
8. Lower vehicle and check for leaks

CAUTION! Transmission fluid may be hot after driving. Wear protective gloves and eyewear.

Technical Data

• Viscosity @ 40°C: 85 cSt
• Viscosity @ 100°C: 14 cSt
• Viscosity Index: 165
• Pour Point: -45°C
• Flash Point: 220°C
• Copper Strip Corrosion: 1a
• Foam Tendency: 10ml max
• Four-Ball Wear Test: 0.45mm scar diameter
• Density @ 15°C: 0.88 g/ml

Tools and Equipment

Required tools for proper gear oil change procedure.

Essential Tools: Jack and jack stands, drain pan, fluid pump, torque wrench, socket set, safety glasses, gloves.

Drain Plug Torque: 33 lb-ft (45 Nm). Fill Plug Torque: 33 lb-ft (45 Nm). Recommended Fluid Pump: Manual or electric transmission fluid pump with appropriate hose diameter.

Maintenance Schedule

Regular maintenance ensures transmission longevity and performance.

1. Normal driving conditions: Replace every 30,000 miles or 3 years
2. Severe driving conditions: Replace every 15,000 miles or 18 months
3. Racing/track use: Replace after each event or 5,000 miles
4. Check fluid level during routine maintenance

Tip: Inspect for leaks and unusual noise during fluid changes.

Performance Characteristics

Specially formulated for Acura manual transmission requirements.

1. Smooth shifting in all temperature conditions
2. Enhanced synchronizer engagement
3. Reduced gear wear and extended component life
4. Excellent thermal stability under high loads
5. Superior oxidation resistance
6. Minimal foaming characteristics
7. Compatible with brass synchronizers
8. Maintains viscosity across operating range

WARNING! Using incorrect fluid may cause transmission damage and void warranty.

Storage and Handling

Store in original container in cool, dry place away from direct sunlight.

CAUTION! Keep away from heat, sparks, and open flames. Contain and absorb spills with appropriate materials.

Safety Information

Follow proper safety procedures when handling transmission fluid. Avoid skin contact; wash thoroughly after handling. Keep out of reach of children. Do not ingest. In case of eye contact, flush with water for 15 minutes and seek medical attention. Dispose of used fluid at approved recycling facilities.

Troubleshooting

Technical Support: Contact Acura dealer for technical assistance

Warranty: 1-year limited warranty from purchase date