Acura Remote Engine Start System III Manual

The Acura Remote Engine Start System III is a sophisticated remote engine starting system designed for Acura vehicles, featuring extended range operation, vehicle security integration, climate control pre-conditioning, and smart key compatibility. The system allows remote starting from up to 400 feet away, includes security features that integrate with factory alarm systems, and provides climate control settings for optimal comfort. Below are key sections for safety, features, installation, operation, programming, and troubleshooting.

1. Features at a Glance 2. Installation Requirements 3. System Components 4. Remote Control Operation 5. Programming & Setup 6. Vehicle Compatibility 7. Security Features 8. Climate Control Integration 9. Maintenance & Care 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Remote transmitter, Control module, Antenna, Wiring harness, Installation accessories.

FeatureDescription
Remote RangeUp to 400 feet line-of-sight operation
Engine RuntimeProgrammable 5-20 minute automatic shutoff
Security IntegrationWorks with factory security system
Climate ControlMaintains preset temperature settings
LED IndicatorsVisual feedback for system status
Battery BackupMaintains settings during battery replacement
Smart Key CompatibleWorks with factory smart key systems
Hood Pin SafetyPrevents remote start if hood is open
Brake SafetyShuts off engine when brake is pressed
Valet ModeTemporarily disables remote start function

Installation Requirements

Professional installation recommended. Verify vehicle compatibility before proceeding.

  1. Vehicle Requirements: Factory alarm system, automatic transmission, functioning engine system.
  2. Tools Needed: Basic hand tools, multimeter, wire connectors, electrical tape.
  3. Installation Time: Approximately 2-3 hours for professional installation.
  4. Wiring: Connect to ignition, starter, security, and accessory circuits.

WARNING! Professional installation required. Incorrect installation may damage vehicle electrical systems. Disconnect battery before beginning installation.

System Components

Complete system includes all necessary components for installation and operation.

Remote Control Operation

Remote transmitter functions and operating procedures.

  1. Remote Start: Press LOCK button twice within 3 seconds
  2. Engine Stop: Press UNLOCK button twice within 3 seconds
  3. Runtime Extension: Press LOCK button during operation
  4. LED Indicators: Green flash - command accepted; Red flash - system error
  5. Range Check: Point remote at vehicle with clear line of sight

CAUTION! Do not operate remote start in enclosed spaces. Ensure vehicle is in park with parking brake engaged.

Programming & Setup

System programming and customization options.

  1. Runtime Setting: Program engine run time (5, 10, 15, 20 minutes)
  2. Climate Control: Set temperature preferences for automatic activation
  3. Security Features: Enable/disable integration with factory alarm
  4. Valet Mode: Temporary disable for service or parking situations
  5. Remote Programming: Sync additional remotes to system

Note: Default runtime is 10 minutes. Programming requires specific sequence of ignition and button presses.

Vehicle Compatibility

Compatible with most Acura models with factory security systems.

Tip: Check specific vehicle compatibility at Acura dealership or authorized installer.

Security Features

Integrated security functions and protection measures.

  1. Factory Alarm Integration: Works with existing vehicle security
  2. Hood Protection: Prevents remote start if hood is opened
  3. Brake Shut-off: Engine stops if brake pedal is pressed
  4. Door Trigger: System monitors door openings during remote start
  5. Anti-theft: Engine cannot be driven away without smart key present

Security Note: Vehicle remains locked during remote start operation. Doors unlock only with proper key fob.

Climate Control Integration

Automatic climate control features for comfort pre-conditioning.

Maintenance & Care

Proper maintenance for optimal system performance.

  1. Remote Batteries: Replace CR2032 batteries annually or when range decreases
  2. System Check: Verify operation every 6 months
  3. Firmware Updates: Check for available updates at Acura dealership
  4. Cleaning: Keep remote transmitter clean and dry
  5. Storage: Avoid extreme temperatures for remote transmitter

CAUTION! Use only recommended battery type. Do not expose remote to moisture or extreme heat.

Regulatory Information

FCC Part 15: This device complies with part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference. Copyright © 2023 Acura; Acura and the Acura logo are trademarks of Honda Motor Co., Ltd. For technical support, contact Acura Client Relations at 1-800-382-2238 or visit www.acura.com.

Troubleshooting

SymptomPossible CauseCorrective Action
Remote doesn't workDead batteries/obstructionsReplace batteries; ensure clear line of sight to vehicle
Engine doesn't startHood open/not in parkClose hood completely; ensure transmission in park
Short runtimeLow fuel/batteryCheck fuel level; test vehicle battery condition
No climate controlSettings not savedReset climate memory; reprogram desired settings
Security system conflictAlarm activatedDisarm factory alarm before remote start attempt

Reset Procedure: Disconnect vehicle battery for 5 minutes to reset system.

Service: 1-800-382-2238; www.acura.com

Acura Remote Engine Start System III Manual © - All Rights Reserved 2025