The Haynes Repair Manual for Acura RSX provides comprehensive technical information for maintaining and repairing 2002-2006 Acura RSX models. This manual covers routine maintenance, troubleshooting, engine repair, transmission service, brake systems, electrical systems, suspension, and more. Designed for both DIY enthusiasts and professional mechanics, it includes step-by-step procedures, wiring diagrams, specifications, and safety precautions.
Technical specifications for 2002-2006 Acura RSX models including engine, transmission, dimensions, and capacities.
| Specification | Details |
|---|---|
| Engine | 2.0L K20A3/K20Z1 I4 (Base/Type-S) |
| Horsepower | 160 hp (Base) / 200 hp (Type-S) |
| Transmission | 5-speed manual / 5-speed automatic |
| Wheelbase | 101.2 inches |
| Curb Weight | 2,744 - 2,822 lbs |
| Fuel Capacity | 13.2 gallons |
| Oil Capacity | 4.5 quarts (with filter) |
| Coolant Capacity | 6.3 quarts |
| Brake System | Front disc / rear disc |
| Tire Size | 205/55R16 |
Scheduled maintenance procedures and intervals for optimal vehicle performance.
WARNING! Always use jack stands when working under vehicle. Wear safety glasses and gloves.
Detailed procedures for engine maintenance, repair, and troubleshooting.
CAUTION! Allow engine to cool completely before working on cooling system components.
Complete brake system service including pads, rotors, calipers, and ABS.
Front Brakes: Pad replacement, rotor resurfacing, caliper service. Rear Brakes: Drum or disc service, parking brake adjustment. ABS System: Diagnostic trouble codes, sensor replacement, module service. Brake Bleeding: Manual and pressure bleeding procedures.
Front and rear suspension components, steering system service.
Tip: Always perform wheel alignment after suspension work.
Battery, charging, starting, lighting, and accessory systems.
WARNING! Disconnect battery negative terminal before working on electrical systems.
Climate control system maintenance and repair.
Heater core: Replacement procedure. AC compressor: Removal and installation. Blower motor: Testing and replacement. Refrigerant: Recovery and recharge procedures. Controls: Cable adjustment and vacuum system service.
Exterior and interior component service and repair.
Door panels: Removal and installation. Window regulators: Motor and mechanism replacement. Seats: Removal and track service. Dashboard: Component access and removal. Exterior trim: Moldings and emblems.
| Symptom | Possible Cause | Corrective Action |
|---|---|---|
| Engine won't start | Battery, starter, fuel pump | Check battery voltage, test starter, listen for fuel pump |
| Poor acceleration | Clogged filter, ignition issues | Replace air filter, check spark plugs and coils |
| Brake vibration | Warped rotors | Resurface or replace brake rotors |
| Steering pull | Alignment, tire pressure | Check alignment, adjust tire pressures |
| Electrical issues | Bad ground, blown fuse | Inspect ground connections, check fuses |
Diagnostic Tips: Use factory service manual for specific diagnostic procedures.
Complete electrical schematics for all vehicle systems including engine management, lighting, accessories, and comfort systems. Diagrams include wire colors, connector locations, ground points, and component identification.
Note: Always verify circuit continuity with multimeter before replacing components.