i 98 acura repair manual service

The i 98 Acura Repair Manual Service provides comprehensive technical documentation for the 1998 Acura vehicle models. This manual covers detailed repair procedures, maintenance schedules, troubleshooting guides, and technical specifications for various Acura models including Integra, TL, CL, and RL series. Below are key sections for vehicle overview, maintenance procedures, repair instructions, specifications, and troubleshooting.

Vehicle Overview

Key components: Engine configurations, transmission types, chassis specifications, and model variations for 1998 Acura vehicles.

Maintenance Procedures

Regular maintenance schedules and procedures for optimal vehicle performance.

1. Oil change: Every 3,000-5,000 miles using recommended 5W-30 oil.
2. Filter replacement: Air filter every 15,000 miles, fuel filter every 30,000 miles.
3. Timing belt: Replace every 90,000 miles (critical for interference engines).
4. Brake inspection: Check pads and rotors every 10,000 miles.
5. Tire rotation: Every 7,500 miles for even wear.

WARNING! Always use jack stands when working under vehicle. Follow torque specifications precisely.

Engine Repair

Detailed procedures for engine disassembly, component replacement, and reassembly.

1. Valve adjustment: Required every 30,000 miles for proper engine performance.
2. Spark plug replacement: Use NGK or Denso plugs every 30,000 miles.
3. Water pump replacement: Recommended with timing belt service.
4. Head gasket replacement: Follow specific torque sequence and values.
5. Oil pump service: Inspect for wear during major engine work.

CAUTION! Engine components are precision parts; handle with care and use proper tools.

Transmission Service

• Automatic Transmission: Fluid change every 30,000 miles using Honda ATF.
• Manual Transmission: Gear oil replacement every 30,000 miles.
• Clutch Replacement: Inspect wear and replace clutch kit as needed.
• Shift Linkage: Adjust for precise gear engagement.
• Transmission Mounts: Check for deterioration and replace if cracked.

Brake System

Complete brake system maintenance and repair procedures.

Front Brakes: Disc brake pad replacement, rotor resurfacing/replacement. Rear Brakes: Drum or disc service depending on model. ABS System: Diagnostic procedures for anti-lock brake system. Brake Fluid: Replace every 2 years using DOT 3 or DOT 4 fluid. Bleeding Procedure: Follow specific sequence for air removal.

Electrical System

Wiring diagrams, component testing, and electrical repair procedures.

1. Battery service: Check terminals for corrosion, test battery capacity.
2. Alternator testing: Output voltage and current draw measurements.
3. Starter motor: Bench testing and replacement procedures.
4. Fuse box: Location and amperage specifications for all circuits.
5. Lighting systems: Headlight adjustment, bulb replacement procedures.

Tip: Always disconnect battery before performing electrical work.

Suspension & Steering

Front and rear suspension components, alignment specifications, and steering system service.

1. Strut replacement: Front and rear strut/shock absorber procedures.
2. Control arms: Bushings and ball joint inspection/replacement.
3. Wheel alignment: Camber, caster, and toe specifications for each model.
4. Power steering: Fluid service and pump replacement procedures.
5. Tie rods: Inner and outer tie rod replacement and adjustment.

WARNING! Always use proper alignment equipment and follow safety procedures.

Technical Specifications

Comprehensive technical data and specifications for all 1998 Acura models.

Diagnostic Procedures

Step-by-step diagnostic procedures for common issues and error codes.

Safety Information

Important safety precautions and procedures for working on Acura vehicles.

CAUTION! Always use safety glasses, gloves, and proper lifting equipment. Follow all environmental regulations for fluid disposal.

Troubleshooting Guide

Technical Support: 1-800-ACURA-98; www.acura-technical.com